System 1.1 · Epoxy self-levelling floors
Smooth epoxy self-levelling floor, 2 mm
A seamless epoxy coating that protects concrete from abrasion, stops dusting and gives the substrate a water-repellent, decorative finish.
- Thickness
- 2 mm
- Layers
- 3
- Total consumption
- ≈ 3.2–3.8 kg/m²
- Service range
- −20 to +60 °C
Colour RAL 7040
Gloss
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Scratch coatTeping Floor 205 Filler 0.4
- 3 TopcoatTeping Floor 205 C or Teping Floor 205 Industrial 2.6 / 3
- Total≈ 3.2–3.8 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Production
- Warehouses
- Retail units
- Laboratories
- Workshops
- Woodworking
- Power plants
Site types
- Warehouses and logistics
- Production and workshops
- Food, chemical, laboratories
- Retail and public spaces
- Car parks and vehicle workshops
Advantages
- Reliable abrasion protection for concrete
- Dust-free and easy to clean
- Water-repellent decorative surface
Service conditions
- Mechanical load
- Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −20 to +60 °C
- Appearance
- Gloss, smooth; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 2.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
Epoxy floorsChemical plant warehouses
Shchyolkovo, Russia4,000 m²Teping Floor 205 PU Varnish Matt
View project 
Epoxy floorsPoultry farm
Makinsk, Kazakhstan2,700 m²Teping Floor 205 Industrial
View project 
Epoxy floorsArchitectural association offices
Saint Petersburg, Russia2,650 m²Teping Floor 205 Industrial
View project 
Epoxy floorsOpen-pit coal mine warehouses
Borodino, Krasnoyarsk Territory, Russia1,750 m²Teping Floor 205 Industrial
View project 
Epoxy floorsCoal mine spare parts warehouse
Nazarovo, Krasnoyarsk Territory, Russia1,380 m²Teping Floor 205 Industrial
View project 
Epoxy floorsContemporary art centre
Moscow, Russia300 m²Teping Floor 205 C
View project 
Epoxy floorsGarage in Shushary
Saint Petersburg, Russia160 m²Teping Floor 205 Industrial
View project 
Epoxy floorsOffice with a gloss floor
Saint Petersburg, Russia80 m²Teping Floor 205 C
View project 
Epoxy floorsGarage near Moscow
Sergiyev Posad, Russia60 m²Teping Floor 205 C
View project 
Epoxy floorsWhite floor in an apartment
Saint Petersburg, Russia50 m²Teping Floor 205 C
View project 
Epoxy floorsTobacco factory washrooms
Moscow, Russia40 m²Teping Floor 205 C
View project 
1.2Anti-slip epoxy floor, 2–2.5 mm
2–2.5 mmLayers: 4−20 to +60 °COpen the system
1.3Epoxy floor with flakes and varnish, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system
1.4Acid-resistant epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.5Antistatic epoxy self-levelling floor, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.