System 1.3 · Epoxy self-levelling floors
Epoxy floor with flakes and varnish, 2 mm
A decorative self-levelling floor with colour flakes under a polyurethane varnish that hides dirt and scratches.
- Thickness
- 2 mm
- Layers
- 5
- Total consumption
- ≈ 3.4–3.8 kg/m²
- Service range
- −20 to +60 °C
Colour RAL 7035
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Scratch coatTeping Floor 205 Filler 0.4
- 3 Base coatTeping Floor 205 C or Teping Floor 205 Industrial 2.6 / 2.8
- 4 Decorative flakesDecorative flakes 0.03
- 5 Protective varnishTeping Floor 205 PU Varnish Mattin 2 coats 0.16
- Total≈ 3.4–3.8 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Healthcare
- Cafés and restaurants
- Shopping centres
- Entrances and stairs
- Garages
- Schools
Site types
Advantages
- The varnish greatly improves chemical and light resistance
- Flakes are protected from dirt by the varnish
- Matt textured surface
Service conditions
- Mechanical load
- Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −20 to +60 °C
- Appearance
- Matt, textured; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
Epoxy floorsLubricants warehouse
Saint Petersburg, Russia600 m²Teping Floor 205 PU Varnish Matt
View project 
Epoxy floorsEsports centre
Saint Petersburg, Russia500 m²Teping Floor 205 PU Varnish Matt
View project 
Epoxy floorsGarage with flakes
Moscow, Russia30 m²Teping Floor 205 PU Varnish Matt
View project 
1.1Smooth epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.2Anti-slip epoxy floor, 2–2.5 mm
2–2.5 mmLayers: 4−20 to +60 °COpen the system
1.4Acid-resistant epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.5Antistatic epoxy self-levelling floor, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.