System 3.4 · Floor paints and sealers
Three-coat polyurethane floor paint
Polyurethane enamel over an epoxy or polyurethane primer, up to 250 µm thick.
- Thickness
- up to 0.25 mm
- Layers
- 3
- Total consumption
- ≈ 0.7–1 kg/m²
- Service range
- −30 to +60 °C
Colour RAL 5015
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100 or Teping PU Primer 1K 0.2–0.4 / 0.08–0.15
- 2 Base coatTeping PU Enamel 1K 0.3
- 3 TopcoatTeping PU Enamel 1K 0.3
- Total≈ 0.7–1 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Production
- Warehouses
- Shopping centres
- Exhibition halls
- Stations
- Woodworking
Site types
Advantages
- Dustproofs and hardens the substrate
- Chemical-resistant, water-repellent surface
- Works at temperatures down to −30 °C
Service conditions
- Mechanical load
- Light to moderate: foot traffic, vehicles on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −30 to +60 °C
- Appearance
- Semi-gloss, orange-peel; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
Floor paintsRetail chain warehouses
Saint Petersburg, Russia2,500 m²Teping Floor 205 PU Enamel 60
View project 
Floor paintsHousing complex stairways
Moscow, Russia1,220 m²Teping Floor 205 PU Enamel 60
View project 
Floor paintsShoe factory
Moscow, Russia1,200 m²Teping Floor 205 PU Enamel 60
View project 
Floor paintsApartment building stairway
Saint Petersburg, Russia460 m²Teping Floor 205 PU Enamel 60
View project 
Floor paintsWorkshop utility room
Saint Petersburg, Russia70 m²Teping Floor 205 PU Enamel 60
View project 
Floor paintsShop entrance stairs
Saint Petersburg, Russia45 m²Teping Floor 205 PU Enamel 60
View project 
3.1Three-coat epoxy floor paint
up to 0.3 mmLayers: 3−20 to +60 °COpen the system
3.2Anti-slip epoxy floor paint
thin coatLayers: 4−20 to +60 °COpen the system
3.3Epoxy paint with flakes and varnish
thin coatLayers: 4−20 to +60 °COpen the system
3.5Three-coat one-component polyurethane coating
thin coatLayers: 3−30 to +60 °COpen the system
3.6Two-coat epoxy sealer
thin coatLayers: 2−30 to +60 °COpen the system
3.7Textured coloured quartz coating, 4–10 mm
4–10 mmLayers: 4−30 to +60 °COpen the system
3.8Polyurethane sealer
thin coatLayers: 2−30 to +70 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.