System 2.4 · Polyurethane self-levelling floors
Polyurethane floor with flakes and varnish, 3 mm
A quartz-reinforced 3 mm polyurethane floor with flakes for a longer service life under heavy traffic.
- Thickness
- 3 mm
- Layers
- 7
- Total consumption
- ≈ 6.8–7 kg/m²
- Service range
- −30 to +50 °C
Colour RAL 7040
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Base coatTeping Floor 205 PU S or Teping Floor 205 PU Filler 1.2
- 3 Quartz sand broadcastRounded quartz sand 0.4–0.8 mm 2.2
- 4 Base coatTeping Floor 205 PU S+ Quartz sand 0.1–0.3 mm mixed in, 0.24 0.56
- 5 Seal coatTeping Floor 205 PU S 2.2
- 6 Decorative flakesDecorative flakes 0.03
- 7 Protective varnishTeping Floor 205 PU Varnish Matt 0.16
- Total≈ 6.8–7 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Production
- Warehouses
- Shopping centres
- Car parks
- Stations and metro
- Cold stores
Site types
- Production and workshops
- Warehouses and logistics
- Retail and public spaces
- Car parks and vehicle workshops
Advantages
- Longer service life under heavy loads
- Bridges fine cracks in the substrate
- Decorative matt surface
Service conditions
- Mechanical load
- Significant: intensive traffic on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −30 to +50 °C
- Appearance
- Matt, smooth; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
2.1Smooth polyurethane self-levelling floor, 2 mm
2 mmLayers: 3−30 to +50 °COpen the system
2.2Anti-slip polyurethane floor, 2 mm
2 mmLayers: 4−30 to +50 °COpen the system
2.3Polyurethane floor with flakes and varnish, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.