System 2.1 · Polyurethane self-levelling floors
Smooth polyurethane self-levelling floor, 2 mm
A tough-elastic polyurethane coating for sites with unstable substrates, vibration and impact loads.
- Thickness
- 2 mm
- Layers
- 3
- Total consumption
- ≈ 3.8–4.4 kg/m²
- Service range
- −30 to +50 °C
Colour RAL 7035
Gloss
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Scratch coatTeping Floor 205 Filler or Teping Floor 205 PU Filler 0.4
- 3 TopcoatTeping Floor 205 PU S or Teping Floor 205 PU Industrial+ Quartz sand 0.1–0.3 mm mixed in, 0.4 2.8 / 3.2
- Total≈ 3.8–4.4 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Production
- Warehouses
- Cold stores
- Workshops
- Car parks
- Power plants
Site types
- Production and workshops
- Warehouses and logistics
- Car parks and vehicle workshops
- Retail and public spaces
Advantages
- Takes vibration and impact loads
- Handles sharp temperature swings, including deep-freeze rooms
- Suits substrates prone to cracking
Service conditions
- Mechanical load
- Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −30 to +50 °C
- Appearance
- Gloss, smooth; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
2.2Anti-slip polyurethane floor, 2 mm
2 mmLayers: 4−30 to +50 °COpen the system
2.3Polyurethane floor with flakes and varnish, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system
2.4Polyurethane floor with flakes and varnish, 3 mm
3 mmLayers: 7−30 to +50 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.