Primer · Epoxy · 2K
Teping EP-Coat Primer Zinc
Zinc-rich epoxy primer
Two-component epoxy primer with over 80% zinc in the dry film for long-term corrosion protection of steel in C3–C5 environments (ISO 12944-5:2018).
- Two-component
- Epoxy
- Metal
- C3–C5
- Standalone coat
- Fast drying
- Theoretical consumption per coat
- 0.20 – 0.39 kg/m²
- Drying time
- 1.5 h
- Non-volatile content by mass
- 82 – 92%
- Dry film thickness
- 40 – 80 µm
Overview
The product at a glance
Key points
- Sacrificial protection of steel
- Fast drying
- System primer or standalone coat out of direct sun
Colour
Grey
Where it is used
Facilities
- Oil and gas industry
- Nuclear power facilities, combined heat and power plants
- Transport infrastructure
- Industrial and civil construction
Guides
- Protecting steel structures from corrosion
- Preparing a concrete substrate for a resin coating
- Temperature, humidity and the dew point
Corrosion protection
Specifications
Technical data
Data from tnpgroup.ru. Check the application instructions before design.
- Components
- Two-component (2K)
- Viscosity
- Thixotropic
- Density (A + B)
- 2.4 – 2.9 g/cm³
- Non-volatile content by mass
- 82 – 92%
- Pot life
- 6 h
- Drying time
- 1.5 h
- Theoretical consumption per coat
- 0.20 – 0.39 kg/m²
- Dry film thickness
- 40 – 80 µm
Quantity for your project
Consumption 0.2–0.39 kg/m² per coat. An estimate from the consumption given on tnpgroup.ru, without allowance for the substrate or losses. A TNP technologist will calculate the exact quantity.
Compatible system
What it goes with
Layers in order of application, from the substrate to the finish. Products in one layer replace each other.
1Primer
- Teping EP-Coat Primer ZincThis product
Teping EP-Coat Primer
Teping PU-Coat Primer RP
2Primer-finish if required
3Topcoat
Product documents
Sent with the reply from a TNP technologist. Say in your enquiry which documents you need.
- Application instructions
- State registration certificate
Your expert
Anastasia Nikiforova
Sales Manager · Primers & varnishes
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Let us match a solution to your project
Tell us the area, substrate and service conditions. A TNP technologist will suggest a system and calculate quantities and delivery times.