Primer · Water-based
Teping NG Primer AS
Conductive antistatic primer
Water-based acrylic primer that forms the conductive bonding layer of Teping antistatic floors on magnesia and cement mixes and connects the floor to the building’s earthing circuit. Free of organic solvents.
- Consumption
- 0.1 kg/m²
- Drying time
- 24 h
- Electrical resistance
- ≤ 10⁴ Ω
Overview
The product at a glance
Key points
- Conductive layer up to 10⁴ Ω
- Free of organic solvents
- Suitable for underfloor heating
Where it is used
Facilities
- Manufacturing
- Warehouses
Purpose
- Conductive underlayer of Teping antistatic floors on magnesia and cement mixes
- Suitable for underfloor heating; indoor use only
Specifications
Technical data
Data from the TNP technical data sheet. Check the application instructions before design.
- Consumption
- 0.1 kg/m²
- Drying time
- 24 h
- Non-volatile content by mass
- ≥ 41 %
- Base
- Acrylic dispersion
- Finish
- Black emulsion
- Density
- 1.1 kg/dm³
- Electrical resistance
- ≤ 10⁴ Ω
- Application temperature
- +10 … +25 °C
Quantity for your project
Consumption 0.1 kg/m² per coat. An estimate from the consumption in the technical data sheet, without allowance for the substrate or losses. A TNP technologist will calculate the exact quantity.
Installation
How it is applied
- 1PrimingA substrate of at least 20 MPa and up to 5 % moisture is primed with Teping Decor Primer.
- 2Laying and sealing the copper tapeSelf-adhesive copper tape is laid 0.5 m from the walls and in a 2–3 m grid with one lead per 40 m²; electricians connect the leads to the earthing circuit.
- 3ApplicationAt least 8 hours after the primer, apply one coat by roller or brush over the whole area, tape included. The floor is laid after 24 hours, once adhesive tape lifts no black marks.
Compatible system
What it goes with
Layers in order of application, from the substrate to the finish. Products in one layer replace each other.
1Primer
- Teping NG Primer ASThis product
Teping Decor Primer
2Self-levelling floor
Packaging and delivery
- Pack sizes
- Plastic containers of 10 l
Product documents
Sent with the reply from a TNP technologist. Say in your enquiry which documents you need.
Your expert
Alexandra Antoshko
Head of Sales · Dry floor mixes
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Let us match a solution to your project
Tell us the area, substrate and service conditions. A TNP technologist will suggest a system and calculate quantities and delivery times.