System 3.1 · Floor paints and sealers
Three-coat epoxy floor paint
A simple, reliable coating up to 300 µm thick that dustproofs and hardens the substrate and makes it chemical- and water-resistant.
- Thickness
- up to 0.3 mm
- Layers
- 3
- Total consumption
- ≈ 0.8–1 kg/m²
- Service range
- −20 to +60 °C
Colour RAL 7040
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Base coatTeping R 1155 0.3
- 3 TopcoatTeping R 1155 0.3
- Total≈ 0.8–1 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Entrances and stairs
- Warehouses
- Garages
- Boiler rooms
- Workshops
- Basements
Site types
- Warehouses and logistics
- Production and workshops
- Car parks and vehicle workshops
- Retail and public spaces
Advantages
- Dustproofs and hardens the substrate
- Chemical-resistant, water-repellent surface
- Texture depends on substrate evenness and preparation
Service conditions
- Mechanical load
- Light to moderate: foot traffic, vehicles on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −20 to +60 °C
- Appearance
- Semi-gloss, orange-peel; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
Floor paintsHeavy machinery service centre
Yaroslavl, Russia3,000 m²Teping R 1155
View project 
Floor paintsAgricultural complex egg store
Oredezh, Leningrad Region, Russia2,000 m²Teping R 1155
View project 
Floor paintsHeavy machinery garage
Magadan, Russia1,500 m²Teping R 1155
View project 
Floor paintsUnderground car park
Saint Petersburg, Russia500 m²Teping R 1155
View project 
Floor paintsPlant premises
Volgograd, Russia280 m²Teping R 1155
View project 
Floor paintsRoller rink in a children's centre
Saint Petersburg, Russia200 m²Teping R 1155
View project 
Floor paintsFootball school stairways
Moscow, Russia120 m²Teping Floor 205 PU Varnish Matt
View project 
Floor paintsSubmarine museum
Kronstadt, Russia100 m²Teping R 1155
View project 
Floor paintsService centre
Rudny, Kazakhstan70 m²Teping R 1155
View project 
Floor paintsOpen veranda of a private house
Leningrad Region, Russia22 m²Teping R 1155
View project 
3.2Anti-slip epoxy floor paint
thin coatLayers: 4−20 to +60 °COpen the system
3.3Epoxy paint with flakes and varnish
thin coatLayers: 4−20 to +60 °COpen the system
3.4Three-coat polyurethane floor paint
up to 0.25 mmLayers: 3−30 to +60 °COpen the system
3.5Three-coat one-component polyurethane coating
thin coatLayers: 3−30 to +60 °COpen the system
3.6Two-coat epoxy sealer
thin coatLayers: 2−30 to +60 °COpen the system
3.7Textured coloured quartz coating, 4–10 mm
4–10 mmLayers: 4−30 to +60 °COpen the system
3.8Polyurethane sealer
thin coatLayers: 2−30 to +70 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.