System 3.8 · Floor paints and sealers
Polyurethane sealer
A one-component clear sealer that dustproofs concrete and takes foot traffic after 8 hours.
- Thickness
- thin coat
- Layers
- 2
- Total consumption
- ≈ 0.3–0.4 kg/m²
- Service range
- −30 to +70 °C
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping PU Primer 1KPrimer consumption depends on how absorbent the substrate is. 0.15–0.22
- 2 TopcoatTeping PU Primer 1K 0.15–0.2
- Total≈ 0.3–0.4 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Production
- Warehouses
- Loft spaces
- Vehicle workshops
- Workshops
- Outdoor areas
Site types
Advantages
- Foot traffic after 8 hours
- Clear, keeps the look of concrete
- Suitable outdoors
Service conditions
- Mechanical load
- Light to moderate: foot traffic, vehicles on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −30 to +70 °C
- Appearance
- Gloss, smooth; clear
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
3.1Three-coat epoxy floor paint
up to 0.3 mmLayers: 3−20 to +60 °COpen the system
3.2Anti-slip epoxy floor paint
thin coatLayers: 4−20 to +60 °COpen the system
3.3Epoxy paint with flakes and varnish
thin coatLayers: 4−20 to +60 °COpen the system
3.4Three-coat polyurethane floor paint
up to 0.25 mmLayers: 3−30 to +60 °COpen the system
3.5Three-coat one-component polyurethane coating
thin coatLayers: 3−30 to +60 °COpen the system
3.6Two-coat epoxy sealer
thin coatLayers: 2−30 to +60 °COpen the system
3.7Textured coloured quartz coating, 4–10 mm
4–10 mmLayers: 4−30 to +60 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.