System 3.2 · Floor paints and sealers
Anti-slip epoxy floor paint
A paint system reinforced with quartz sand that hides minor substrate defects and takes vehicle traffic.
- Thickness
- thin coat
- Layers
- 4
- Total consumption
- ≈ 3.4–3.6 kg/m²
- Service range
- −20 to +60 °C
Colour RAL 6018
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Base coatTeping R 1155 0.4
- 3 Quartz sand broadcastQuartz sand 0.1–0.3 mm 2
- 4 TopcoatTeping R 1155 0.8
- Total≈ 3.4–3.6 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Production
- Warehouses
- Car parks
- Garages
- Ramps
- Hangars
Site types
Advantages
- Hides minor substrate defects
- Resists petrochemicals and salt water
- Takes intensive vehicle traffic
Service conditions
- Mechanical load
- Light to moderate: foot traffic, vehicles on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −20 to +60 °C
- Appearance
- Semi-gloss, rough; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
3.1Three-coat epoxy floor paint
up to 0.3 mmLayers: 3−20 to +60 °COpen the system
3.3Epoxy paint with flakes and varnish
thin coatLayers: 4−20 to +60 °COpen the system
3.4Three-coat polyurethane floor paint
up to 0.25 mmLayers: 3−30 to +60 °COpen the system
3.5Three-coat one-component polyurethane coating
thin coatLayers: 3−30 to +60 °COpen the system
3.6Two-coat epoxy sealer
thin coatLayers: 2−30 to +60 °COpen the system
3.7Textured coloured quartz coating, 4–10 mm
4–10 mmLayers: 4−30 to +60 °COpen the system
3.8Polyurethane sealer
thin coatLayers: 2−30 to +70 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.