System 5.2 · Sports and safety surfaces
Teping Sport EPDM safety surface
A bright seamless surface of EPDM granules: the whole granule is coloured, so the colour lasts longer than pigmented crumb.
- Thickness
- from 10 mm
- Layers
- 3
- Total consumption
- ≈ 8.8–9 kg/m²
- Service range
- −30 to +60 °C
Colour Terracotta
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping AD RCPrimer consumption depends on how absorbent the substrate is. 0.23–0.4
- 2 BinderTeping AD RC 1.6
- 3 TopcoatTeping Sport EPDM 7
- Total≈ 8.8–9 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Children's playgrounds
- Sports grounds
- Pedestrian areas
Site types
Advantages
- Bright, rich colours
- Dense structure and long service life
- Colour holds even when a granule is damaged
Service conditions
- Mechanical load
- Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres
- Liquids and chemicals
- Rain and water
- Service temperature
- −30 to +60 °C
- Appearance
- Porous; 11 EPDM colours
Substrate requirements
- Moisture: max 5%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- Evenness: max 2 mm under a 2 m straightedge
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
- Asphalt and ground substrates are prepared to current standards: compacted soil, sand bed, crushed stone base and screenings, or fine-grained asphalt concrete.
Visualiser
Recolour the playgroundProducts
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
Sports surfacesOlympic Park footbridges
Sochi, Russia18,600 m²Teping Sport EPDM
View project 
Sports surfacesOlympic Embankment cycle paths
Sochi, Russia18,200 m²Teping Sport EPDM
View project 
Sports surfacesChildren's playground
Saint Petersburg, Russia860 m²Teping Sport EPDM
View project 
Sports surfacesChildren's playground
Vityazevo, Russia860 m²Teping Sport EPDM
View project 
Sports surfacesOil field sports ground
Nenets Autonomous Okrug, Russia840 m²Teping Sport EPDM
View project 
Sports surfacesBackyard mini golf
Yanino, Leningrad Region, Russia750 m²Teping Sport EPDM
View project 
Sports surfacesTennis court
Repino, Saint Petersburg, Russia705 m²Teping Sport EPDM
View project 
Sports surfacesChildren's playground
Zheleznodorozhny, Russia650 m²Teping Sport EPDM
View project 
Sports surfacesPrivate school playground
Saint Petersburg, Russia520 m²Teping Sport EPDM
View project 
Sports surfacesHousing complex basketball court
Moscow, Russia420 m²Teping Sport EPDM
View project 
5.1Teping Sport Classic safety surface
from 10 mmLayers: 3−30 to +60 °COpen the system
5.3Teping Sport Combi safety surface
12–20 mmLayers: 5−30 to +60 °COpen the system
5.4Teping Sport PU combined surface
thin coatLayers: 6−20 to +60 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.