System 1.2 · Epoxy self-levelling floors
Anti-slip epoxy floor, 2–2.5 mm
An epoxy coating with a quartz sand broadcast: a rough surface that resists fuels, oils and solutions of salts, acids and alkalis.
- Thickness
- 2–2.5 mm
- Layers
- 4
- Total consumption
- ≈ 7.1–7.9 kg/m²
- Service range
- −20 to +60 °C
Colour RAL 7040
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Base coatTeping Floor 205 Filler 1.2
- 3 Quartz sand broadcastRounded quartz sand 0.4–0.8 mm 3.5
- 4 TopcoatTeping Floor 205 C or Teping Floor 205 Industrial 2.2 / 2.8
- Total≈ 7.1–7.9 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Car parks
- Vehicle workshops
- Hangars
- Ramps
- Car washes
- Food industry
- Power plants
Site types
- Car parks and vehicle workshops
- Food, chemical, laboratories
- Production and workshops
- Warehouses and logistics
Advantages
- Slip-resistant surface for wet areas and ramps
- Resists fuels, oils and salt solutions
- Protects concrete from abrasion and dusting
Service conditions
- Mechanical load
- Significant: intensive traffic on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −20 to +60 °C
- Appearance
- Gloss, rough; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
1.1Smooth epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.3Epoxy floor with flakes and varnish, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system
1.4Acid-resistant epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.5Antistatic epoxy self-levelling floor, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.