Teping® manufacturer
02 / 07 · Category
Protection for concrete and metal.
Paints for concrete and anticorrosive enamels for metal, made under the Teping® brand. Each coating is selected as part of a system with the right primer for your substrate and exposure.
The basics
Paints and enamels are thin-film coatings for concrete and metal, applied in two or three coats.
R 1155 epoxy paints give a hard, wear-resistant film, while polyurethane enamels are lightfast and suit outdoor use.
Together with their primers, the EP-Coat and PU-Coat anticorrosive enamels form steel protection systems for environments C3 to C5 under ISO 12944.
Painting suits jobs that need protection and colour without the thick layer of a self-levelling floor.
PRODUCT LINES
Pick a line to jump straight to its products.
Epoxy paints that dust-proof and protect concrete.
Products: 4See products 02Polyurethane paints for concrete: a protective and decorative finish.
Products: 4See products 03Enamels that protect steel structures and equipment from corrosion.
Products: 3See productsPRODUCTS
Every product in this category, grouped by line. The product page has the full description; send an enquiry and we will help you choose a system.
Chemistry
Substrate
Corrosivity, ISO 12944
Dry film per coat
Properties
Epoxy paints that dust-proof and protect concrete.
Products: 4| Paint | Binder | Solids | Per coat | Surface | Drying |
|---|---|---|---|---|---|
| Teping R 1155 | Epoxy | 92% | 0.30 kg/m² | textured gloss | 24 h |
| Teping R 1155 Eco | Epoxy, solvent-free | 99% | 0.30 kg/m² | textured gloss | 24 h |
| Teping R 1155 Matt | Epoxy, low solvent | 70% | no data | textured matt | 24 h |
| Teping R 1155 CR | Epoxy, solvent-free | 92% | no data | textured gloss | 24 h |
Paint · Epoxy · 2K
Wear-resistant epoxy paint for concrete and metal with high adhesion to the substrate, corrosion and weather resistance, and fast strength gain.
Paint · Epoxy · 2K
Odourless, wear-resistant epoxy paint for concrete and metal with high adhesion to the substrate, corrosion and weather resistance, and fast strength gain.
Paint · Epoxy · 2K
Wear-resistant epoxy paint for concrete and metal with a matt finish, high adhesion to the substrate, corrosion and weather resistance, and fast strength gain.
Paint · Epoxy · 2K
Coloured epoxy paint for concrete and metal, specially formulated for chemical resistance, with high adhesion to the substrate, corrosion and weather resistance, and fast strength gain.
Polyurethane paints for concrete: a protective and decorative finish.
Products: 4| Enamel | Binder | Solids | Per coat | Surface | Drying |
|---|---|---|---|---|---|
| Teping Floor 205 PU Enamel 60 | Polyurethane, 2K | 65% | 0.30 kg/m² | smooth gloss | 24 h |
| Teping PU Enamel 1K | Polyurethane primer-enamel, 1K | 70% | 0.20 kg/m² | textured semi-gloss | 12 h |
| Teping PU Enamel UV 1K | Polyurethane, 1K | 62% | 0.20 kg/m² | semi-matt, matt | 12 h |
| Teping PU Enamel UV AS 1K | Polyurethane antistatic, 1K | 70% | 0.15 kg/m² | textured matt | 12 h |
Enamel · Acrylic PU · 2K
Two-component polyurethane enamel for concrete and metal with fast strength gain. Elastic, with high adhesion and resistance to chemicals and UV radiation.
Primer-finish · Polyurethane · 1K
Single-component coloured polyurethane primer-finish coating with high solids, cured by air moisture. Can be applied indoors and outdoors at low temperatures (below 5 °C).
Enamel · Polyurethane · 1K
Single-component rigid-elastic polyurethane enamel for concrete and metal, cured by air moisture and resistant to UV radiation.
Primer-finish · Polyurethane · 1K
Single-component antistatic polyurethane primer-finish coating, cured by air moisture. For floors within 3 m of the earthing system and for removing static from metal equipment.
Enamels that protect steel structures and equipment from corrosion.
Products: 3| Enamel | Binder | Substrate | ISO 12944 | Dry film per coat | Non-volatiles, mass | Gloss |
|---|---|---|---|---|---|---|
| Teping PU-Coat Top | Polyurethane topcoat, 1K | steel, concrete | C3–C5 | 50 – 70 µm | 62 (±4)% | Semi-gloss, semi-matt |
| Teping PUR-Coat Top | Acrylic polyurethane topcoat, 2K | steel, concrete | C3–C5 | 50 – 90 µm | 68 (±8)% | Gloss, semi-gloss, semi-matt |
| Teping EP-Coat Mastic | High-build epoxy primer-enamel, 2K | steel, galvanised steel, aluminium, concrete | C3–C5 | 80 – 300 µm | 72 – 80% | no data |
Topcoat · Polyurethane · 1K
Single-component, moisture-curing polyurethane topcoat with UV resistance. The finishing coat in protective systems for metal and concrete structures.
Primer-finish · Epoxy · 2K
Two-component thixotropic, surface-tolerant epoxy mastic with zinc phosphate. Used as a single-coat system or as a primer for high-build protection of metal and concrete structures.
Topcoat · Acrylic PU · 2K
Two-component, weather-resistant acrylic polyurethane topcoat with UV resistance and high decorative qualities. The finishing coat in protective systems for metal and concrete.
There is no product with this combination. Clear one of the filters or describe the task to us and we will suggest a solution. Find a system
Systems
Products from this category inside proven systems, from primer to topcoat.
3.1Three-coat epoxy floor paint
up to 0.3 mmLayers: 3−20 to +60 °COpen the system
3.2Anti-slip epoxy floor paint
thin coatLayers: 4−20 to +60 °COpen the system
3.3Epoxy paint with flakes and varnish
thin coatLayers: 4−20 to +60 °COpen the system
3.4Three-coat polyurethane floor paint
up to 0.25 mmLayers: 3−30 to +60 °COpen the system
3.5Three-coat one-component polyurethane coating
thin coatLayers: 3−30 to +60 °COpen the system Steel protection
How to combine Teping® primers, intermediate coats and topcoats for categories C2–C5, which preparation to choose and how to check thickness.
Guides
Practical guides on choosing, preparing for and installing these products.
01
Epoxy, polyurethane, PU-cement or paint: choosing a floor coatingHow the four types of Teping® floor coatings differ in thickness, strength, elasticity and heat resistance, and where each one works best.
4 min readRead the guide 04
Temperature, humidity and the dew pointWhy two-component coatings are sensitive to cold and heat, how to check the dew point and what changes in winter and summer.
4 min readRead the guide 
06
Protecting steel structures from corrosionCorrosivity categories, surface preparation, a three-coat Teping® system and the conditions for application.
3 min readRead the guide APPLICATIONS
Typical projects for this category. Tell us about yours and we will suggest a system.
FAQ
The two-component polyurethane Teping Floor 205 PU Enamel 60. It is lightfast, does not fade in the sun and does not crack with temperature swings. It smells during application, but not once it is dry.
Self-levelling floors and epoxy paints need air above +10 °C and a substrate 3 °C above the dew point. Below +5 °C use single-component moisture-curing polyurethanes such as Teping PU Primer 1K and Teping PU Enamel 1K.
Yes. Grind the old surface, prime it to ensure adhesion, then apply the new decorative or protective coat.
No. Wait until the primer has fully dried, otherwise the adhesion will be poor.
CATALOGUE
01Resin flooringEpoxy. Polyurethane. PU cement.
03Primers & varnishesFrom the first layer to the finish.
04Sports surfacesIndoor and outdoor applications.
05Polyurethane materialsInsulate. Bond. Waterproof. Mould.
06Water-based paintsWalls, ceilings and facades.
07Dry floor mixesHeavy-duty floors and levellers.
Your expert
Sales Manager · Enamels & paints
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Tell us what you are building, protecting or producing.
The right coating depends on budget and operating conditions — we will suggest the best fit.