02 / 06 · Industry
Production and workshops
In production, the floor carries equipment, vehicles, impacts and spills all at once. Teping® systems are chosen for the heaviest load in each area: chemical-resistant, antistatic, heat-resistant or cost-effective paint coatings.
- ready-made systems
- 15
- coating types
- 4
- Teping® products
- 21
Service conditions
What matters on site
- 01
Mechanical load
Traffic on rubber tyres, impact and vibration. Elastic polyurethane floors suit unstable substrates.
- 02
Chemicals and spills
Oils, fuels, solutions of acids and alkalis. Chemical resistance depends on the topcoat.
- 03
Safety
Antistatic floors for production areas with explosion risk and for electronics; anti-slip floors for wet areas.
- 04
Return to service
One-component systems and sealers get an area back into operation faster.
Site zones
Solutions by zone
Different rooms on one site work in different conditions. For each zone, the systems that suit its load, chemicals and temperature.
- 01
Production halls and workshops
Seamless 2 mm self-levelling floors or quartz-reinforced paint: they protect concrete from abrasion, stop dusting and are easy to clean.
- 02
Impact and heavy loads
Tough-elastic polyurethane for substrates prone to cracking, and 6–10 mm polyurethane cement for vehicles on metal wheels with polymer rims.
- 03
Areas with chemicals and washdown
Acid-resistant epoxy floor and polyurethane-cement systems that resist solutions of acids and alkalis and cleaning with superheated steam.
- 04
Antistatic zones
Production areas with explosion risk, electronics, server and switchboard rooms: an epoxy floor with a conductive layer and copper tape.
- 05
Stores and ancillary rooms
Cost-effective paint systems and sealers for areas with moderate loads.
Coating visualiser
See a workshop floor in 3D
A workshop with machines and walkways. Choose the system, zone colours and finish and save the view for your enquiry.
Ready-made systems
Systems for this industry
All Teping® coating systems for this type of site. The system name leads to its layer build-up, consumption and substrate requirements.
| System | Thickness | Load | Chemicals and liquids | Service range |
|---|---|---|---|---|
 1.1 Smooth epoxy self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 1.2 Anti-slip epoxy floor, 2–2.5 mm |
2–2.5 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 1.4 Acid-resistant epoxy self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Acids, alkalis, solvents and cleaning with hot water or steam | −20 to +60 °C |
 1.5 Antistatic epoxy self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 2.1 Smooth polyurethane self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +50 °C |
 2.2 Anti-slip polyurethane floor, 2 mm |
2 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +50 °C |
 2.4 Polyurethane floor with flakes and varnish, 3 mm |
3 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +50 °C |
 3.1 Three-coat epoxy floor paint |
up to 0.3 mm | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 3.2 Anti-slip epoxy floor paint |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 3.4 Three-coat polyurethane floor paint |
up to 0.25 mm | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +60 °C |
 3.5 Three-coat one-component polyurethane coating |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +60 °C |
 3.6 Two-coat epoxy sealer |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +60 °C |
 3.8 Polyurethane sealer |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +70 °C |
 4.1 Self-levelling polyurethane-cement floor, 4–6 mm |
4–6 mm | Significant: intensive traffic on rubber tyres | Acids, alkalis, solvents and cleaning with hot water or steam | −40 to +80 °C |
 4.2 Heavy-duty polyurethane-cement floor, 6–10 mm |
6–10 mm | Very significant: including vehicles on metal wheels with polymer rims | Acids, alkalis, solvents and cleaning with hot water or steam | −30 to +80 °C |
Teping® products
What the systems are made of
Products used in the systems for this industry. System numbers are listed under each name; the product card opens in the catalogue.
Teping R 1155 Primer 1001.1 · 1.2 · 1.4 · 1.5 · 2.1 · 2.2 · 2.4 · 3.1 · 3.2 · 3.4 · 3.6
Teping Floor 205 Filler1.1 · 1.2 · 1.4 · 1.5 · 2.1
Teping Floor 205 C1.1 · 1.2
Teping Floor 205 Industrial1.1 · 1.2
Teping Floor 205 CR1.4
Teping R 1155 Primer AS1.5
Teping Floor 205 AS1.5
Teping Floor 205 PU Filler2.1 · 2.2 · 2.4
Teping Floor 205 PU S2.1 · 2.2 · 2.4
Teping Floor 205 PU Industrial2.1
Teping Floor 205 PU Varnish Matt2.4
Teping R 11553.1 · 3.2
Teping PU Primer 1K3.4 · 3.5 · 3.8
Teping PU Enamel 1K3.4 · 3.5
Teping PU-C Primer4.1 · 4.2
Teping PU-C SL4.1
Teping PU-C HF4.2
More for this site
Products from the tnpgroup.ru catalogue used on such sites beyond flooring.
Enamels & paintsTeping R 1155 EcoSolvent-free, odourless paint, convenient for operating production sites.Product card 
Resin flooringTeping Epoxy Repair ResinEpoxy repair resin: impregnating glass fabric, fillers and minor repairs.Product card 
Enamels & paintsTeping EP-Coat MasticSurface-tolerant epoxy mastic for protecting steel structures, including over tightly adhering rust.Product card 
Polyurethane materialsTeping Spray 20-60 WSpray polyurethane foam for insulating roofs and industrial buildings.Product card Projects
Where Teping® coatings are already at work
A few sites from the TNP Group reference list: area, city and the work carried out.
- 4,300 m²Metallurgical plant
- 4,500 m²Plastic window factory
- 2,400 m²Electrical components plant
- 1,500 m²Pipe plant
01Warehouses and logisticsForklift aisles, racking areas, ramps and cold stores.
Systems: 14Open
03Food and chemical plants, laboratoriesHot washdown, acids and alkalis, wet floors and clean rooms.
Systems: 7Open
04Car parks and vehicle workshopsDriveways and parking bays, ramps, car washes and service areas.
Systems: 12Open
05Retail and public buildingsSales floors, educational buildings, healthcare, cafés and exhibitions.
Systems: 14Open
06Sports and playgroundsSports halls, outdoor sports grounds, playgrounds and ice rinks.
Systems: 4Open Systems and applications are based on the TNP technical solutions album 2025 and the 2025 industry albums (warehouses, production, car parks, educational buildings, sports facilities). Products and their names follow the tnpgroup.ru catalogue.
Tell us about your site
Describe the site, loads and timescale: a technologist will select a coating system and calculate the quantities.