Paint · Acrylic
Teping Decor Terra
Interior textured paint
Acrylic paint with marble filler that forms a finely rough, hard-wearing finish resistant to washing and hides small defects and unevenness. It also serves as the base for flock finishes.
- Theoretical consumption per coat
- 0.225 – 0.425 kg/m²
- Drying to degree 3 (tack-free)
- 1.5 h
- Solids content
- 45 – 55 %

Overview
The product at a glance
Key points
- Texture with marble particles
- Higher wear resistance
- Base for flock finishes
Colour
WhiteTinted to the RAL K7 chart
Where it is used
Facilities
- Apartments and offices
- Shopping centres
- Schools, universities, kindergartens
Purpose
- Protective decorative finish for walls in moderate and heavy use
- Base for flock finishes: the first coat tints, the second is the adhesive bed for acrylic chips
Specifications
Technical data
Data from the TNP technical data sheet. Check the application instructions before design.
- Theoretical consumption per coat
- 0.225 – 0.425 kg/m²
- Drying to degree 3 (tack-free)
- 1.5 h
- Solids content
- 45 – 55 %
- Density
- 1.45 ± 0.1 g/cm³
- Coating gloss
- Matt
- Application temperature
- +5 … +30 °C
- Next coat after
- 6 h
Quantity for your project
Consumption 0.23–0.42 kg/m² per coat. An estimate from the consumption in the technical data sheet, without allowance for the substrate or losses. A TNP technologist will calculate the exact quantity.
How many coats to apply
- 2 coats
- Painting over a primed substrate
Installation
How it is applied
- 1Surface preparationThe substrate must be sound, dry and clean: remove loose areas, grease, efflorescence and mould, and level it with plaster or filler.
- 2PrimingTreat the substrate with Teping Decor Primer. New concrete is painted after 28 days at the earliest, cement plasters after 14 days.
- 3ApplicationTwo coats by brush, roller or spray at +5 … +30 °C and humidity up to 80 %; the second coat after 6 hours at the earliest.
Packaging and delivery
- Pack sizes
- Plastic pails of 10 l and 20 l
Product documents
Sent with the reply from a TNP technologist. Say in your enquiry which documents you need.

Your expert
Alexandra Antoshko
Head of Sales · Water-based paints
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Let us match a solution to your project
Tell us the area, substrate and service conditions. A TNP technologist will suggest a system and calculate quantities and delivery times.



