Skip to content

System 4.1 · Polyurethane-cement floors

Self-levelling polyurethane-cement floor, 4–6 mm

A heat- and chemical-resistant coating with a smooth matt surface that takes steam cleaning, acids and alkalis.

Thickness: 4–6 mm
Layers: 2
Total consumption: ≈ 8.4 kg/m²
Service range: −40 to +80 °C

Cutaway on concrete: layers run left to right in order of application, thicknesses are enlarged for clarity.

Build-up

Layer by layer

The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.

Matt, smooth; limited colour range

1 PrimingTeping PU-C PrimerPrimer consumption depends on how absorbent the substrate is. 0.4
2 TopcoatTeping PU-C SL 8
Total≈ 8.4 kg/m²

Where it is used

Chemical production
Food production
Warehouses
Laboratories
Plant rooms
Exhibition halls

Site types

Advantages

Resists steam cleaning, acids and alkalis
Up to +80 °C continuously, +140 °C for short periods
Smooth matt surface
Foot traffic on the second day

Service conditions

Mechanical load: Significant: intensive traffic on rubber tyres
Liquids and chemicals: Acids, alkalis, solvents and cleaning with hot water or steam
Service temperature: −40 to +80 °C
Appearance: Matt, smooth; limited colour range

Substrate requirements

Moisture: max 8%
Concrete age: at least 28 days
Compressive strength: at least 20 MPa
Pull-off strength: at least 1.5 MPa
The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.

Before you start

Preparing a concrete substrate for a resin coating Temperature, humidity and the dew point

Products

Products in this system

Every product in the system is made by TNP Group under the Teping® brand.

Teping PU-C PrimerProduct card

Teping PU-C SLProduct card

We will calculate the system for your site

Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.

order@tnpgroup.ru