Paint · Acrylic
Teping Decor AS
Antistatic interior paint
Acrylic water-based paint whose film dissipates static charge. For walls and ceilings of laboratories, electronics plants, server and switch rooms and explosion-hazard production; it works together with the building’s earthing circuit.
- Theoretical consumption per coat
- 0.21 – 0.31 kg/m²
- Drying to degree 3 (tack-free)
- 1 h
- Solids content
- 45 – 60 %
Overview
The product at a glance
Key points
- Dissipates static electricity
- Dark grey or black
- For rooms with precision instruments
Colour
Dark grey or black
Where it is used
Facilities
- Manufacturing
- Healthcare, pharmaceuticals
Purpose
- Electronics plants, laboratories and rooms with precision instruments
- Explosion-hazard production, server rooms and switch rooms
- A copper tape or anchors connected to the earthing bar run along the perimeter of the painted surface
Specifications
Technical data
Data from the TNP technical data sheet. Check the application instructions before design.
- Theoretical consumption per coat
- 0.21 – 0.31 kg/m²
- Drying to degree 3 (tack-free)
- 1 h
- Solids content
- 45 – 60 %
- Density
- 1.32 ± 0.1 g/cm³
- Coating gloss
- Matt
- Application temperature
- +5 … +30 °C
- Next coat after
- 6 h
Quantity for your project
Consumption 0.21–0.31 kg/m² per coat. An estimate from the consumption in the technical data sheet, without allowance for the substrate or losses. A TNP technologist will calculate the exact quantity.
How many coats to apply
- 2 coats
- Painting over a primed substrate
Installation
How it is applied
- 1Surface preparationThe substrate must be sound, dry and clean: remove loose areas, grease, efflorescence and mould, and level it with plaster or filler.
- 2PrimingTreat the substrate with Teping Decor Primer. New concrete is painted after 28 days at the earliest, cement plasters after 14 days.
- 3ApplicationTwo coats by brush, roller or spray at +5 … +30 °C and humidity up to 80 %; the second coat after 6 hours at the earliest.
Compatible system
What it goes with
Layers in order of application, from the substrate to the finish. Products in one layer replace each other.
1Primer
2Paint
- Teping Decor ASThis product
Packaging and delivery
- Pack sizes
- Plastic pails of 10 l and 20 l
Product documents
Sent with the reply from a TNP technologist. Say in your enquiry which documents you need.
Your expert
Alexandra Antoshko
Head of Sales · Water-based paints
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Let us match a solution to your project
Tell us the area, substrate and service conditions. A TNP technologist will suggest a system and calculate quantities and delivery times.