Teping® manufacturer
Products
The whole range on one page. Browse by category, by industry or as one table with the key figures.
01
02
03
04
05
06
07
08
01
02
03
04
05
06| Product | Consumption | Drying time | Adhesion to concrete | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Floor 205 CSelf-levelling floor · Epoxy · 2K | 1.5 kg/m² per 1 mm | 24 h | 2.5 MPa | 1.11.21.3 | |
| Teping Floor 205 FillerFiller · Epoxy · 2K | 0.4 kg/m² per coat | 24 h | > 2.5 MPa | 1.11.21.31.41.52.1 | |
| Teping Floor 205 IndustrialSelf-levelling floor · Epoxy · 2K | 1.7 kg/m² per 1 mm | 24 h | > 2.5 MPa | 1.11.21.3 | |
| Teping Floor 205 Clear 3DResin · Epoxy · 2K | 1.1 kg/m² per 1 mm | 24 h | > 2.5 MPa | 3.7 | |
| Teping Floor 205 ASSelf-levelling floor · Epoxy · 2K | 1.5 kg/m² per 1 mm | 24 h | > 2.5 MPa | 1.5 | |
| Teping Floor 205 CRSelf-levelling floor · Epoxy · 2K | 1.5 kg/m² per 1 mm | 24 h | > 2.5 MPa | 1.4 |
| Product | Consumption | Drying time | Adhesion to concrete | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Floor 205 PU SSelf-levelling floor · Polyurethane · 2K | 1.4 kg/m² per 1 mm | 24 h | > 2.5 MPa | 2.12.22.32.45.4 | |
| Teping Floor 205 PU FillerFiller · Polyurethane · 2K | 0.4 kg/m² per coat | 24 h | > 2.5 MPa | 2.12.22.32.45.4 | |
| Teping Floor 205 PU IndustrialSelf-levelling floor · Polyurethane · 2K | 1.6 kg/m² per 1 mm | 24 h | > 2.5 MPa | 2.1 |
| Product | Consumption | Drying time | Adhesion to concrete | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping PU-C EnamelEnamel · PU cement · 3K | 0.4 kg/m² | 24 h | > 2.5 MPa | — | |
| Teping PU-C HFFloor coating · PU cement · 3K | 2.1 kg/m² per 1 mm | — | > 2 MPa | 4.2 | |
| Teping PU-C SLSelf-levelling floor · PU cement · 3K | 2 kg/m² per 1 mm | 24 h | > 2 MPa | 4.1 | |
| Teping PU-C PrimerPrimer · PU cement · 3K | 0.4 kg/m² | 24 h | > 2.5 MPa | 4.14.2 |
| Product | Consumption | Drying time | Adhesion to concrete | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Floor 205 Casting ResinResin · Epoxy · 2K | 1.10 kg/m² per 1 mm | 24 h | > 2.5 MPa | — | |
| Teping Epoxy Repair ResinResin · Epoxy · 2K | 1.1 kg/m² per 1 mm | 24 h | > 2.5 MPa | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping R 1155Paint · Epoxy · 2K | 0.30 kg/m² | 24 h | 92% | 3.13.23.3 | |
| Teping R 1155 EcoPaint · Epoxy · 2K | 0.30 kg/m² | 24 h | 99% | — | |
| Teping R 1155 MattPaint · Epoxy · 2K | 0.3 kg/m² per coat | 24 h | 70% | — | |
| Teping R 1155 CRPaint · Epoxy · 2K | 0.3 kg/m² per coat | 24 h | 92% | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Floor 205 PU Enamel 60Enamel · Acrylic PU · 2K | 0.30 kg/m² | 24 h | 65% | — | |
| Teping PU Enamel 1KPrimer-finish · Polyurethane · 1K | 0.20 kg/m² | 12 h | 70% | 3.43.5 | |
| Teping PU Enamel UV 1KEnamel · Polyurethane · 1K | 0.20 kg/m² | 12 h | 62% | — | |
| Teping PU Enamel UV AS 1KPrimer-finish · Polyurethane · 1K | 0.15 kg/m² | 12 h | 70% | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping PU-Coat TopTopcoat · Polyurethane · 1K | 0.13 – 0.18 kg/m² | 6 h | 62 (±4)% | — | |
| Teping EP-Coat MasticPrimer-finish · Epoxy · 2K | 0.17 – 0.63 kg/m² | 6 h | 72 – 80% | — | |
| Teping PUR-Coat TopTopcoat · Acrylic PU · 2K | 0.13 – 0.23 kg/m² | — | 68 (±8)% | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping R 1155 Primer 100Primer · Epoxy · 2K | — | — | > 99% | 1.11.21.31.41.52.12.22.32.43.13.23.33.43.63.7 | |
| Teping R 1155 PrimerPrimer · Epoxy · 2K | 0.30 kg/m² | 24 h | 79% | — | |
| Teping R 1155 Primer FastPrimer · Epoxy · 2K | from 0.22 kg/m² | 1.5 h | 99% | — | |
| Teping R 1155 Primer 40Penetrating primer · Epoxy · 2K | from 0.20 kg/m² | 12 h | 40% | — | |
| Teping R 1155 Primer ASPrimer · Epoxy · 2K | 0.30 kg/m² | 24 h | 60% | 1.5 | |
| Teping PU Primer 1KPrimer · Polyurethane · 1K | 0.20 kg/m² | 12 h | 46% | 3.43.53.85.4 |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping PU-Coat Primer RPPrimer · Polyurethane · 1K | 0.07 – 0.11 kg/m² | 7 h | 53 (±3)% | — | |
| Teping EP-Coat Primer ZincPrimer · Epoxy · 2K | 0.20 – 0.39 kg/m² | 1.5 h | 82 – 92% | — | |
| Teping EP-Coat PrimerPrimer · Epoxy · 2K | 0.14 – 0.42 kg/m² | 5 h | 75 – 85% | — | |
| Teping PU-Coat PrimerPrimer · Polyurethane · 1K | 0.14 – 0.34 kg/m² | 4 h | 57 (±3)% | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping EP-Coat MasticPrimer-finish · Epoxy · 2K | 0.17 – 0.63 kg/m² | 6 h | 72 – 80% | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Floor 205 PU Varnish Semi-MattClear coat · Acrylic PU · 2K | 0.07 kg/m² | 5 h | 25% | — | |
| Teping Floor 205 PU Varnish MattClear coat · Acrylic PU · 2K | 0.05 kg/m² | 8 h | 35% | 1.32.32.43.35.4 |
| Product | Adhesion to concrete | Drying time | Ready for use | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Sport EPDMSeamless surface · EPDM | 2.5 MPa | 24 h | 72 h | 5.2 | |
| Teping Sport CombiSeamless surface · Crumb + EPDM | 2.5 MPa | 24 h | 72 h | 5.3 | |
| Teping Sport ClassicSeamless surface · Rubber crumb | 2.5 MPa | 24 h | 72 h | 5.1 |
| Product | Adhesion to concrete | Drying time | Ready for use | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Sport EPDMSeamless surface · EPDM | 2.5 MPa | 24 h | 72 h | 5.2 | |
| Teping Sport CombiSeamless surface · Crumb + EPDM | 2.5 MPa | 24 h | 72 h | 5.3 | |
| Teping Sport ClassicSeamless surface · Rubber crumb | 2.5 MPa | 24 h | 72 h | 5.1 |
| Product | Thickness | Density | Service temperature | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Sport Roll SRolls · SBR | 4 – 12 mm | up to 1,250 kg/m³ | −40 to +110 °C | — | |
| Teping Sport RollRolls · SBR | 4 – 12 mm | up to 1,000 kg/m³ | −40 to +110 °C | — | |
| Teping Sport Roll BaseUnderlay · SBR | 4 – 12 mm | up to 850 kg/m³ | −40 to +110 °C | 5.4 | |
| Teping Sport Roll EPDM 15%Rolls · SBR + EPDM | 4 – 12 mm | up to 1,450 kg/m³ | −40 to +110 °C | — | |
| Teping Sport Roll EPDM 100%Rolls · EPDM | 4 – 12 mm | up to 1,500 kg/m³ | −40 to +110 °C | — | |
| Teping Sport Roll EPDM 30%Rolls · SBR + EPDM | 4 – 12 mm | up to 1,450 kg/m³ | −40 to +110 °C | — | |
| Teping Sport Roll EPDM 50%Rolls · SBR + EPDM | 4 – 12 mm | up to 1,450 kg/m³ | −40 to +110 °C | — |
| Product | Viscosity at 25 °C | Pot life | Full cure | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping AD SIPAdhesive · Polyurethane · 1K | 1,000 – 6,000 mPa·s | 5 – 50 min | 24 h | — | |
| Teping AD PAdhesive · Polyurethane · 2K | — | 25 – 35 min | — | — | |
| Teping AD RCAdhesive · Polyurethane · 1K | 3,000 – 5,000 mPa·s | 10 – 60 min | 18 – 24 h | 5.15.25.3 | |
| Teping AD GTAdhesive · Polyurethane · 1K | 9,800 mPa·s | 30 min | 2 h | — | |
| Teping AD SPAdhesive · Polyurethane · 2K | 150 – 500 mPa·s | — | — | — | |
| Teping AD RTAdhesive · Polyurethane · 2K | — | — | — | 5.4 | |
| Teping AD AGAdhesive · Polyurethane · 2K | — | 25 – 40 min | — | — |
| Product | Cream time | Density | Thermal conductivity | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping FL PIRPanels · PIR · 2K | 5 – 20 s | 30 – 40 kg/m³ | — | — | |
| Teping AD PIRAdhesive primer · PIR · 2K | 20 – 100 s | — | — | — |
| Product | Density | Gel time | Elongation at break | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping FL MWPWaterproofing · Polyurethane · 2K | 1.3 (±0.1) g/cm³ | 25 min | 100 % | — |
| Product | Cream time | Density | Thermal conductivity | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Spray 20-60 WSpray · PU foam · 2K | 2 – 10 s | — | max. 0.035 W/(m·K) | — | |
| Teping Spray 10Spray · PU foam · 2K | 2 – 6 s | — | max. 0.045 W/(m·K) | — |
| Product | Cream time | Density | Thermal conductivity | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping FL 20-60 F/WPour-in-place · PU foam · 2K | 10 – 20 s | — | max. 0.035 W/(m·K) | — | |
| Teping FL 10Pour-in-place · PU foam · 2K | 10 – 20 s | — | — | — | |
| Teping FL REPour-in-place · PU foam · 2K | 15 – 25 s | 25 – 35 kg/m³ | — | — |
| Product | Cream time | Density | Thermal conductivity | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping FL PMoulding · PU foam · 2K | 40 – 70 s | at least 60 kg/m³ | max. 0.035 W/(m·K) | — | |
| Teping FL STMoulding · PU foam · 2K | 20 – 40 s | at least 60 kg/m³ | max. 0.035 W/(m·K) | — | |
| Teping FL DMoulding · PU foam · 2K | 20 – 40 s | 40 – 600 kg/m³ | — | — |
| Product | Cream time | Rise time | Density | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping FL EPFFlexible foam · PU foam · 2K | 10 – 20 s | 100 – 200 s | 18 – 25 kg/m³ | — | |
| Teping Spray ECFoam coating · Polyurethane · 1K | — | — | — | — |
| Product | Cream time | Rise time | Density | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping FL IPFIntegral skin · PU foam · 2K | 35 – 55 s | 80 – 120 s | 200 – 230 kg/m³ | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Decor BasePaint · Acrylic | 0.11 – 0.18 kg/m² | 1 h | 54 – 60 % | — | |
| Teping Decor UltraPaint · Acrylic | 0.125 – 0.225 kg/m² | 1 h | 45 – 60 % | — | |
| Teping Decor TerraPaint · Acrylic | 0.225 – 0.425 kg/m² | 1.5 h | 45 – 55 % | — | |
| Teping Decor ASPaint · Acrylic | 0.21 – 0.31 kg/m² | 1 h | 45 – 60 % | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Decor FacadePaint · Acrylic | 0.165 – 0.265 kg/m² | 1 h | 45 – 65 % | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Decor PrimerPrimer · Water-based | 0.2 – 0.25 kg/m² | 1 h | 25 – 30 % | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Decor AquaflexProtective film · 1K | 0.25 – 0.5 kg/m² | 3 h | 20% | — |
| Product | Layer thickness | Compressive strength | Walk-on after | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Cem 40Industrial floor · Cement | 20 – 100 mm | ≥ 50 MPa | 24 h | — | |
| Teping Cem 60Industrial floor · Cement | 20 – 100 mm | ≥ 70 MPa | 24 h | — |
| Product | Layer thickness | Compressive strength | Walk-on after | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping Cem UniversalLevelling screed · Cement | 5 – 30 mm | ≥ 40 MPa | 3 – 4 h | — | |
| Teping Cem MSelf-levelling floor · Magnesia | 5 – 25 mm | ≥ 45 MPa | — | — |
| Product | Consumption per coat | Drying time | Solids content | Used in systems | Add to enquiry |
|---|---|---|---|---|---|
| Teping NG Primer ASPrimer · Water-based | 0.1 kg/m² | 24 h | ≥ 41 % | — | |
| Teping Decor PrimerPrimer · Water-based | 0.2 – 0.25 kg/m² | 1 h | 25 – 30 % | — |
Nothing found. Try another word or ask us: we will choose a coating for the job.
A seamless epoxy coating that protects concrete from abrasion, stops dusting and gives the substrate a water-repellent, decorative finish.
2 mmLayers: 3−20 to +60 °C
A tough-elastic polyurethane coating for sites with unstable substrates, vibration and impact loads.
2 mmLayers: 3−30 to +50 °C
The toughest system in the album: takes heat, steam cleaning and heavy vehicles.
6–10 mmLayers: 2−30 to +80 °C
An epoxy coating with a quartz sand broadcast: a rough surface that resists fuels, oils and solutions of salts, acids and alkalis.
2–2.5 mmLayers: 4−20 to +60 °C
A polyurethane coating with a quartz broadcast that takes heavy loads across a wide temperature range.
2 mmLayers: 4−30 to +50 °C
A paint system reinforced with quartz sand that hides minor substrate defects and takes vehicle traffic.
thin coatLayers: 4−20 to +60 °C
A simple, reliable coating up to 300 µm thick that dustproofs and hardens the substrate and makes it chemical- and water-resistant.
up to 0.3 mmLayers: 3−20 to +60 °C
A fast-drying system: three coats in one day and foot traffic from the second day.
thin coatLayers: 3−30 to +60 °C
A clear epoxy primer penetrates deep to harden concrete and improve its wear and chemical resistance.
thin coatLayers: 2−30 to +60 °C
A one-component clear sealer that dustproofs concrete and takes foot traffic after 8 hours.
thin coatLayers: 2−30 to +70 °C
A quartz-reinforced 3 mm polyurethane floor with flakes for a longer service life under heavy traffic.
3 mmLayers: 7−30 to +50 °C
A quick decorative option: paint, flakes and a protective varnish with a short installation time.
thin coatLayers: 4−20 to +60 °C
Polyurethane enamel over an epoxy or polyurethane primer, up to 250 µm thick.
up to 0.25 mmLayers: 3−30 to +60 °C
A heat- and chemical-resistant coating with a smooth matt surface that takes steam cleaning, acids and alkalis.
4–6 mmLayers: 2−40 to +80 °C
A chemical-resistant epoxy coating for areas exposed to surfactants, acids, alkalis and solvents.
2 mmLayers: 3−20 to +60 °C
A conductive epoxy coating with an earthing circuit that dissipates static electricity.
2 mmLayers: 5−20 to +60 °C
Coloured quartz sand in an epoxy binder under a clear topcoat: a slip-resistant texture for indoor and outdoor use.
4–10 mmLayers: 4−30 to +60 °C
A decorative self-levelling floor with colour flakes under a polyurethane varnish that hides dirt and scratches.
2 mmLayers: 5−20 to +60 °C
An elastic decorative floor with flakes under varnish for busy public spaces.
2 mmLayers: 5−20 to +60 °C
A rubber roll underlay under a tough-elastic polyurethane self-levelling floor: a seamless sports surface for halls.
thin coatLayers: 6−20 to +60 °C
A bright seamless surface of EPDM granules: the whole granule is coloured, so the colour lasts longer than pigmented crumb.
from 10 mmLayers: 3−30 to +60 °C
A two-layer surface: a shock-absorbing base of black rubber crumb and a wearing layer of coloured EPDM.
12–20 mmLayers: 5−30 to +60 °C
A seamless surface of coloured rubber crumb on a polyurethane binder for sports grounds and playgrounds.
from 10 mmLayers: 3−30 to +60 °C