Primer · Water-based
Teping Decor Primer
Universal water-based primer
Polymer dispersion primer that binds dust on concrete, brick, cement and gypsum substrates, plasterboard and gypsum fibre board before plasters, fillers, tile adhesives and paints. For indoor use.
- Theoretical consumption per coat
- 0.2 – 0.25 kg/m²
- Drying to degree 3 (tack-free)
- 1 h
- Solids content
- 25 – 30 %
Overview
The product at a glance
Key points
- Binds dust on the substrate
- Under plaster, tile adhesive and paint
- Survives up to 5 freeze cycles
Where it is used
Facilities
- Apartments and offices
- Industrial and civil construction
Purpose
- Preparing concrete, brick, cement and gypsum substrates, plasterboard and gypsum fibre board for plasters, fillers, tile adhesives and paints
- Not intended for metal or wood
Specifications
Technical data
Data from the TNP technical data sheet. Check the application instructions before design.
- Theoretical consumption per coat
- 0.2 – 0.25 kg/m²
- Drying to degree 3 (tack-free)
- 1 h
- Solids content
- 25 – 30 %
- Density
- 1.05 ± 0.1 g/cm³
- Coating appearance
- Semi-matt clear film
- Application temperature
- +5 … +30 °C
Quantity for your project
Consumption 0.2–0.25 kg/m² per coat. An estimate from the consumption in the technical data sheet, without allowance for the substrate or losses. A TNP technologist will calculate the exact quantity.
How many coats to apply
- 2 coats
- Each coat after the previous one has fully dried
Installation
How it is applied
- 1Surface preparationThe substrate must be sound, dry and clean, free of grease, efflorescence and mould; mask neighbouring surfaces with tape.
- 2ApplicationStir and apply two coats by brush, roller or spray at +5 … +30 °C; each coat after the previous one has fully dried.
Compatible system
What it goes with
Layers in order of application, from the substrate to the finish. Products in one layer replace each other.
1Primer
- Teping Decor PrimerThis product
Teping NG Primer AS
2Paint
Packaging and delivery
- Pack sizes
- Plastic cans of 5 l and 10 l
Product documents
Sent with the reply from a TNP technologist. Say in your enquiry which documents you need.
Your expert
Alexandra Antoshko
Head of Sales · Water-based paints
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Let us match a solution to your project
Tell us the area, substrate and service conditions. A TNP technologist will suggest a system and calculate quantities and delivery times.