System 3.6 · Floor paints and sealers
Two-coat epoxy sealer
A clear epoxy primer penetrates deep to harden concrete and improve its wear and chemical resistance.
- Thickness
- thin coat
- Layers
- 2
- Total consumption
- ≈ 0.4–0.6 kg/m²
- Service range
- −30 to +60 °C
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 TopcoatTeping R 1155 Primer 100 0.22
- Total≈ 0.4–0.6 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Production
- Warehouses
- Stairs
- Loft spaces
- Vehicle workshops
- Garages
Site types
- Production and workshops
- Warehouses and logistics
- Car parks and vehicle workshops
- Retail and public spaces
Advantages
- Penetrates deep and hardens concrete
- Improves wear and chemical resistance
- A popular loft-style finish
Service conditions
- Mechanical load
- Light to moderate: foot traffic, vehicles on rubber tyres
- Liquids and chemicals
- Water, fuels and oils, weak solutions of salts, acids and alkalis
- Service temperature
- −30 to +60 °C
- Appearance
- Gloss, smooth; clear
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
Floor paintsConcrete-look floor, furniture gallery
Saint Petersburg, Russia320 m²Teping R 1155 Primer 100
View project 
Floor paintsOffice with a concrete-look floor
Saint Petersburg, Russia170 m²Teping R 1155 Primer 100
View project 
Floor paintsConcrete dustproofing
Saint Petersburg, Russia75 m²Teping R 1155 Primer 100
View project 
3.1Three-coat epoxy floor paint
up to 0.3 mmLayers: 3−20 to +60 °COpen the system
3.2Anti-slip epoxy floor paint
thin coatLayers: 4−20 to +60 °COpen the system
3.3Epoxy paint with flakes and varnish
thin coatLayers: 4−20 to +60 °COpen the system
3.4Three-coat polyurethane floor paint
up to 0.25 mmLayers: 3−30 to +60 °COpen the system
3.5Three-coat one-component polyurethane coating
thin coatLayers: 3−30 to +60 °COpen the system
3.7Textured coloured quartz coating, 4–10 mm
4–10 mmLayers: 4−30 to +60 °COpen the system
3.8Polyurethane sealer
thin coatLayers: 2−30 to +70 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.