Teping® manufacturer
07 / 07 · Category
Heavy-duty floors and levellers.
Teping Cem dry mixes for concrete and self-levelling floors: high-strength cement floors 20–100 mm thick, spark-free and antistatic floors for explosion-hazard production, and self-levelling screeds 5–30 mm thick that also serve as a base for Teping resin coatings.
The basics
Dry mixes are gauged on site with water or, for magnesia mixes, with bischofite solution and laid 5 to 100 mm thick.
Cem 40 and Cem 60 with crushed stone make a load-bearing concrete floor for workshops, warehouses and car parks; Cem 40 also gives no sparks.
The self-levelling Cem Universal and Cem M level the substrate 5–30 mm thick and serve as a finished floor or a base for Teping resin coatings.
All Teping Cem mixes are non-combustible (NG class) and comply with GOST 31358-2019.
PRODUCT LINES
Pick a line to jump straight to its products.
Cement floors 20–100 mm thick laid with crushed stone: wear-resistant or spark-free.
Products: 2See products 02Self-levelling mixes 5–30 mm thick: a finished floor or a base for resin coatings.
Products: 2See products 03Primers under the mixes: dust binding and the conductive layer of an antistatic floor.
Products: 2See productsPRODUCTS
Every product in this category, grouped by line. The product page has the full description; send an enquiry and we will help you choose a system.
Chemistry
Properties
Cement floors 20–100 mm thick laid with crushed stone: wear-resistant or spark-free.
Products: 2
Industrial floor · Cement
Cement mix with marble aggregate for impact-resistant, spark-free industrial floors 20–100 mm thick. It withstands heavy static and mechanical loads and liquids; the material is non-combustible (NG class).
Industrial floor · Cement
Cement mix with polymer fibre and granite aggregate for finished concrete floors 20–100 mm thick in workshops, warehouses, car parks and retail halls. The surface can be ground to terrazzo or used to level the base for a resin coating.
Self-levelling mixes 5–30 mm thick: a finished floor or a base for resin coatings.
Products: 2
Levelling screed · Cement
One-component, polymer-modified, fast-drying mix for final levelling of concrete and sand-cement substrates 5–30 mm thick under parquet, tiles, seamless resins and resilient floor coverings. Walk-on after 3–4 hours.
Self-levelling floor · Magnesia
Magnesia self-levelling mix for finished floors 5–25 mm thick in rooms with explosion and fire hazards and antistatic requirements. It serves as a floor in its own right or as a base for resin coatings; non-combustible (NG class).
Primers under the mixes: dust binding and the conductive layer of an antistatic floor.
Products: 2
Primer · Water-based
Water-based acrylic primer that forms the conductive bonding layer of Teping antistatic floors on magnesia and cement mixes and connects the floor to the building’s earthing circuit. Free of organic solvents.
Primer · Water-based
Polymer dispersion primer that binds dust on concrete, brick, cement and gypsum substrates, plasterboard and gypsum fibre board before plasters, fillers, tile adhesives and paints. For indoor use.
There is no product with this combination. Clear one of the filters or describe the task to us and we will suggest a solution.
Coating visualiser
Teping Cem in a workshop: compare the trowelled and polished surface and the magnesia floor.
APPLICATIONS
Typical projects for this category. Tell us about yours and we will suggest a system.
FAQ
A sound, dry substrate (moisture up to 5 %) free of dust, oil and laitance: concrete at least 1–3 months old, sand-cement screed at least 28 days, compressive strength from 15 to 25 MPa depending on the mix. An absorbent substrate is primed in two coats 2–3 hours apart.
Yes: Teping Cem Universal and Teping Cem M serve as a base for resin coatings. Before an impermeable coating, Cem Universal needs 24 hours at up to 15 mm and 48 hours at up to 30 mm; always check the moisture first.
Yes. Movement and shrinkage joints of the substrate are repeated in the floor; without them, the floor is cut into bays of up to 6 × 6 m (about 6 × 3 m for Cem M) 24–48 hours after laying and filled with polyurethane sealant after 7–10 days.
A spark-free one: the cement Teping Cem 40 20–100 mm thick or the magnesia Teping Cem M 5–25 mm thick. Cem M is also antistatic: it is laid over the conductive Teping NG Primer AS connected to the earthing circuit.
CATALOGUE
01Resin flooringEpoxy. Polyurethane. PU cement.
02Enamels & paintsProtection for concrete and metal.
03Primers & varnishesFrom the first layer to the finish.
04Sports surfacesIndoor and outdoor applications.
05Polyurethane materialsInsulate. Bond. Waterproof. Mould.
06Water-based paintsWalls, ceilings and facades.
Your expert
Head of Sales · Dry floor mixes
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Tell us what you are building, protecting or producing.
The right coating depends on budget and operating conditions — we will suggest the best fit.
