03 / 06 · Industry
Food and chemical plants, laboratories
In food and chemical production, floors are cleaned constantly and exposed to acids, alkalis and hot water. Teping® polyurethane-cement and chemical-resistant epoxy systems are designed for these conditions.
- ready-made systems
- 7
- coating types
- 3
- Teping® products
- 12
Service conditions
What matters on site
- 01
Hot washdown
Polyurethane-cement floors resist cleaning with superheated steam and take up to +80 °C continuously and up to +130–140 °C for short periods.
- 02
Acids and alkalis
The acid-resistant epoxy floor withstands surfactants, solutions of acids and alkalis, and solvents.
- 03
Wet floors
Wet areas need a rough surface with quartz sand.
- 04
Hygiene
A seamless, non-porous coating does not trap dirt and is easy to clean.
Site zones
Solutions by zone
Different rooms on one site work in different conditions. For each zone, the systems that suit its load, chemicals and temperature.
- 01
Food production halls and hot zones
4–6 mm polyurethane cement for halls with washdown, and 6–10 mm for hot zones up to +80 °C continuously and heavy vehicles.
- 02
Chemical production
Acid-resistant epoxy floor for areas with reagent spills, and self-levelling polyurethane cement for areas with hot water.
- 03
Wet areas and walkways
Anti-slip epoxy and polyurethane floors that resist fuels, oils and salt solutions.
- 04
Laboratories with instruments
Antistatic floor for laboratories, server rooms and X-ray rooms.
- 05
Corridors and packing
Smooth 2 mm self-levelling epoxy floor for clean zones with moderate loads.
Coating visualiser
Food production in 3D
A room with sinks and drains. Compare polyurethane cement and self-levelling systems, colour and texture.
Ready-made systems
Systems for this industry
All Teping® coating systems for this type of site. The system name leads to its layer build-up, consumption and substrate requirements.
| System | Thickness | Load | Chemicals and liquids | Service range |
|---|---|---|---|---|
 1.1 Smooth epoxy self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 1.2 Anti-slip epoxy floor, 2–2.5 mm |
2–2.5 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 1.4 Acid-resistant epoxy self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Acids, alkalis, solvents and cleaning with hot water or steam | −20 to +60 °C |
 1.5 Antistatic epoxy self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 2.2 Anti-slip polyurethane floor, 2 mm |
2 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +50 °C |
 4.1 Self-levelling polyurethane-cement floor, 4–6 mm |
4–6 mm | Significant: intensive traffic on rubber tyres | Acids, alkalis, solvents and cleaning with hot water or steam | −40 to +80 °C |
 4.2 Heavy-duty polyurethane-cement floor, 6–10 mm |
6–10 mm | Very significant: including vehicles on metal wheels with polymer rims | Acids, alkalis, solvents and cleaning with hot water or steam | −30 to +80 °C |
Teping® products
What the systems are made of
Products used in the systems for this industry. System numbers are listed under each name; the product card opens in the catalogue.
Teping R 1155 Primer 1001.1 · 1.2 · 1.4 · 1.5 · 2.2
Teping Floor 205 Filler1.1 · 1.2 · 1.4 · 1.5
Teping Floor 205 C1.1 · 1.2
Teping Floor 205 Industrial1.1 · 1.2
Teping Floor 205 CR1.4
Teping R 1155 Primer AS1.5
Teping Floor 205 AS1.5
Teping Floor 205 PU S2.2
Teping Floor 205 PU Filler2.2
Teping PU-C Primer4.1 · 4.2
Teping PU-C SL4.1
Teping PU-C HF4.2
Projects
Where Teping® coatings are already at work
A few sites from the TNP Group reference list: area, city and the work carried out.
- 4,000 m²Fish processing plant
- 2,000 m²Confectionery production
- 2,700 m²Poultry farm
- 750 m²Chemical reagents plant
01Warehouses and logisticsForklift aisles, racking areas, ramps and cold stores.
Systems: 14Open
02Production and workshopsProduction halls, areas with chemicals and impact, antistatic zones and ancillary rooms.
Systems: 15Open
04Car parks and vehicle workshopsDriveways and parking bays, ramps, car washes and service areas.
Systems: 12Open
05Retail and public buildingsSales floors, educational buildings, healthcare, cafés and exhibitions.
Systems: 14Open
06Sports and playgroundsSports halls, outdoor sports grounds, playgrounds and ice rinks.
Systems: 4Open Systems and applications are based on the TNP technical solutions album 2025 and the 2025 industry albums (warehouses, production, car parks, educational buildings, sports facilities). Products and their names follow the tnpgroup.ru catalogue.
Tell us about your site
Describe the site, loads and timescale: a technologist will select a coating system and calculate the quantities.