System 1.4 · Epoxy self-levelling floors
Acid-resistant epoxy self-levelling floor, 2 mm
A chemical-resistant epoxy coating for areas exposed to surfactants, acids, alkalis and solvents.
- Thickness
- 2 mm
- Layers
- 3
- Total consumption
- ≈ 3.8–4 kg/m²
- Service range
- −20 to +60 °C
Colour RAL 7024
The cutaway is redrawn right in your browser.
This gloss is not in the album: TNP's technical team will choose the layers for it.
Build-up
Layer by layer
The drawing is schematic; layer thicknesses are not to scale. Point at a layer to find it in the drawing; product names lead to their cards.
- 1 PrimingTeping R 1155 Primer 100Primer consumption depends on how absorbent the substrate is. 0.2–0.4
- 2 Scratch coatTeping Floor 205 Filler 0.4
- 3 TopcoatTeping Floor 205 CR+ Quartz sand 0.1–0.3 mm mixed in, 1 2.2
- Total≈ 3.8–4 kg/m²
Indicative estimate from the album consumption figures. Our technologist will confirm exact quantities for your substrate, with a margin.
Where it is used
- Food production
- Chemical production
- Laboratories
- Workshops
- Power plants
Site types
Advantages
- Higher resistance to surfactants, acids, alkalis and solvents
- Suits chemical and petrochemical plants
- Smooth gloss surface
Service conditions
- Mechanical load
- Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres
- Liquids and chemicals
- Acids, alkalis, solvents and cleaning with hot water or steam
- Service temperature
- −20 to +60 °C
- Appearance
- Gloss, smooth; colours from the RAL K7 Classic chart
Substrate requirements
- Moisture: max 4%
- Concrete age: at least 28 days
- Compressive strength: at least 20 MPa
- Pull-off strength: at least 1.5 MPa
- The substrate must be sound, uniform, clean and dry, free of laitance, oil, grease and old coatings.
Products
Products in this system
Every product in the system is made by TNP Group under the Teping® brand.
On site
Where a similar system already works
TNP Group sites finished with a close build-up of layers.
Epoxy floorsWarehouse with acid-resistant floor
Saint Petersburg, Russia1,200 m²Teping Floor 205 CR
View project 
Epoxy floorsPlant room with acid-resistant floor
Saint Petersburg, Russia700 m²Teping Floor 205 CR
View project 
Epoxy floorsCar workshop
Moscow, Russia70 m²Teping Floor 205 CR
View project 
1.1Smooth epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.2Anti-slip epoxy floor, 2–2.5 mm
2–2.5 mmLayers: 4−20 to +60 °COpen the system
1.3Epoxy floor with flakes and varnish, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system
1.5Antistatic epoxy self-levelling floor, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system Based on the TNP Group technical solutions album (2025 edition). Consumption and properties are indicative; check the product technical data sheets before design.
We will calculate the system for your site
Send us the area, substrate type and service conditions. A TNP technologist will confirm the build-up, quantities and delivery times.