01 / 06 · Industry
Warehouses and logistics
Warehouse floors take constant forklift and trolley traffic, while ramps and cold stores add slipping and frost. Ready-made Teping® systems range from a dustproofing sealer to a polyurethane-cement floor 6–12 mm thick.
- ready-made systems
- 14
- coating types
- 4
- Teping® products
- 16
Service conditions
What matters on site
- 01
Wheel loads
Forklifts and trolleys abrade and chip concrete. The coating protects the substrate from abrasion and stops dusting.
- 02
Ramps and loading docks
Slopes and gateways need a rough layer with quartz sand so that vehicles and people do not slip.
- 03
Frost and temperature swings
Cold stores and unheated warehouses suit polyurethane systems, which work from −30 °C.
- 04
Timescale and budget
From three coats of paint to a 2 mm self-levelling floor and polyurethane cement: the choice depends on load and service life.
Site zones
Solutions by zone
Different rooms on one site work in different conditions. For each zone, the systems that suit its load, chemicals and temperature.
- 01
Storage areas and aisles
A level, seamless floor for racking and forklift traffic. For the heaviest loads, including vehicles on metal wheels with polymer rims, a highly filled polyurethane cement.
- 02
Ramps, loading docks and gate areas
Anti-slip systems: quartz sand is broadcast into the coating, and its grade sets the roughness.
- 03
Cold and freezer stores
Tough-elastic polyurethane floors withstand sharp temperature swings and service in deep-freeze rooms.
- 04
Plant rooms and stairs
Cost-effective paint coatings and sealers: they dustproof and harden concrete and go on quickly.
Coating visualiser
See a warehouse floor in 3D
A warehouse with racks and aisles. Change the system, colour and finish and see the floor under working light, new and in use.
Ready-made systems
Systems for this industry
All Teping® coating systems for this type of site. The system name leads to its layer build-up, consumption and substrate requirements.
| System | Thickness | Load | Chemicals and liquids | Service range |
|---|---|---|---|---|
 1.1 Smooth epoxy self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 1.2 Anti-slip epoxy floor, 2–2.5 mm |
2–2.5 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 2.1 Smooth polyurethane self-levelling floor, 2 mm |
2 mm | Moderate to significant: foot traffic, trolleys and forklifts on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +50 °C |
 2.2 Anti-slip polyurethane floor, 2 mm |
2 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +50 °C |
 2.4 Polyurethane floor with flakes and varnish, 3 mm |
3 mm | Significant: intensive traffic on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +50 °C |
 3.1 Three-coat epoxy floor paint |
up to 0.3 mm | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 3.2 Anti-slip epoxy floor paint |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 3.3 Epoxy paint with flakes and varnish |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −20 to +60 °C |
 3.4 Three-coat polyurethane floor paint |
up to 0.25 mm | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +60 °C |
 3.5 Three-coat one-component polyurethane coating |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +60 °C |
 3.6 Two-coat epoxy sealer |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +60 °C |
 3.8 Polyurethane sealer |
thin coat | Light to moderate: foot traffic, vehicles on rubber tyres | Water, fuels and oils, weak solutions of salts, acids and alkalis | −30 to +70 °C |
 4.1 Self-levelling polyurethane-cement floor, 4–6 mm |
4–6 mm | Significant: intensive traffic on rubber tyres | Acids, alkalis, solvents and cleaning with hot water or steam | −40 to +80 °C |
 4.2 Heavy-duty polyurethane-cement floor, 6–10 mm |
6–10 mm | Very significant: including vehicles on metal wheels with polymer rims | Acids, alkalis, solvents and cleaning with hot water or steam | −30 to +80 °C |
Teping® products
What the systems are made of
Products used in the systems for this industry. System numbers are listed under each name; the product card opens in the catalogue.
Teping R 1155 Primer 1001.1 · 1.2 · 2.1 · 2.2 · 2.4 · 3.1 · 3.2 · 3.3 · 3.4 · 3.6
Teping Floor 205 Filler1.1 · 1.2 · 2.1
Teping Floor 205 C1.1 · 1.2
Teping Floor 205 Industrial1.1 · 1.2
Teping Floor 205 PU Filler2.1 · 2.2 · 2.4
Teping Floor 205 PU S2.1 · 2.2 · 2.4
Teping Floor 205 PU Industrial2.1
Teping Floor 205 PU Varnish Matt2.4 · 3.3
Teping R 11553.1 · 3.2 · 3.3
Teping PU Primer 1K3.4 · 3.5 · 3.8
Teping PU Enamel 1K3.4 · 3.5
Teping PU-C Primer4.1 · 4.2
Teping PU-C SL4.1
Teping PU-C HF4.2
More for this site
Products from the tnpgroup.ru catalogue used on such sites beyond flooring.
Enamels & paintsTeping R 1155 EcoOdourless, solvent-free epoxy paint, used on warehouses and storage facilities from the reference list.Product card 
Enamels & paintsTeping Floor 205 PU Enamel 60Polyurethane enamel for painting concrete in warehouses and production areas; withstands temperature swings.Product card Projects
Where Teping® coatings are already at work
A few sites from the TNP Group reference list: area, city and the work carried out.
- 5,200 m²Hypermarket chain distribution centre
- 10,000 m²Production and warehouse complex
- 4,030 m²Coal mining company warehouses
- 1,000 m²Cold stores
02Production and workshopsProduction halls, areas with chemicals and impact, antistatic zones and ancillary rooms.
Systems: 15Open
03Food and chemical plants, laboratoriesHot washdown, acids and alkalis, wet floors and clean rooms.
Systems: 7Open
04Car parks and vehicle workshopsDriveways and parking bays, ramps, car washes and service areas.
Systems: 12Open
05Retail and public buildingsSales floors, educational buildings, healthcare, cafés and exhibitions.
Systems: 14Open
06Sports and playgroundsSports halls, outdoor sports grounds, playgrounds and ice rinks.
Systems: 4Open Systems and applications are based on the TNP technical solutions album 2025 and the 2025 industry albums (warehouses, production, car parks, educational buildings, sports facilities). Products and their names follow the tnpgroup.ru catalogue.
Tell us about your site
Describe the site, loads and timescale: a technologist will select a coating system and calculate the quantities.