Teping® manufacturer
06 / 07 · Category
Walls, ceilings and facades.
Water-based acrylic paints under the Teping® brand for walls, ceilings and facades: washable matt paints, a paint for wet rooms, a textured paint with marble filler and an antistatic paint. They are tinted to the RAL K7 chart and applied by brush, roller or spray.
The basics
Water-based paints are thinned with water and contain no organic solvents, so they have no sharp odour and suit homes, children’s and medical facilities.
The binder of Teping Decor is an acrylic dispersion: once dry it forms a moisture-resistant film that withstands repeated washing.
Base, Ultra and Terra are for interior walls and ceilings, Facade for facades and plinths, and AS dissipates static in laboratories and server rooms.
The paints go over a primed substrate in two coats and are tinted to the RAL K7 chart.
PRODUCT LINES
Pick a line to jump straight to its products.
Washable acrylic paints for walls and ceilings, wet rooms included.
Products: 4See products 02Weather-resistant acrylic paint for facades, plinths and outside walls.
Products: 1See products 03A water-based primer that binds dust on mineral substrates before painting.
Products: 1See products 04A peelable film that protects glass, stone, metal and plastic during renovation.
Products: 1See productsPRODUCTS
Every product in this category, grouped by line. The product page has the full description; send an enquiry and we will help you choose a system.
Properties
Washable acrylic paints for walls and ceilings, wet rooms included.
Products: 4
Paint · Acrylic
Washable matt water-based paint for walls and ceilings in rooms with normal and high humidity. It has no sharp odour and hides small surface defects; suitable for homes, children’s and medical facilities.
Paint · Acrylic
Washable water-based paint with mould inhibitors for kitchens, bathrooms, toilets and other rooms where mould may appear. No sharp odour and a high degree of whiteness.
Paint · Acrylic
Acrylic paint with marble filler that forms a finely rough, hard-wearing finish resistant to washing and hides small defects and unevenness. It also serves as the base for flock finishes.
Paint · Acrylic
Acrylic water-based paint whose film dissipates static charge. For walls and ceilings of laboratories, electronics plants, server and switch rooms and explosion-hazard production; it works together with the building’s earthing circuit.
Weather-resistant acrylic paint for facades, plinths and outside walls.
Products: 1
Paint · Acrylic
Elastic, moisture-resistant matt paint for outside and inside finishing of mineral surfaces: facades, plinths, walls, balconies and terraces. It keeps its colour, resists water and withstands repeated washing.
A water-based primer that binds dust on mineral substrates before painting.
Products: 1
Primer · Water-based
Polymer dispersion primer that binds dust on concrete, brick, cement and gypsum substrates, plasterboard and gypsum fibre board before plasters, fillers, tile adhesives and paints. For indoor use.
A peelable film that protects glass, stone, metal and plastic during renovation.
Products: 1
Protective film · 1K
Single-component compound for temporary protection of glass, stone, metal and plastic surfaces from dirt and damage during indoor construction and renovation work.
There is no product with this combination. Clear one of the filters or describe the task to us and we will suggest a solution.
Coating visualiser
The «Floor · Walls · Ceiling» mode: Teping Decor Base, Ultra and Terra in RAL K7 colours on the walls and ceiling of a living room, classroom or ward.
APPLICATIONS
Typical projects for this category. Tell us about yours and we will suggest a system.
FAQ
Yes. A clean, dry substrate is treated with Teping Decor Primer: it binds dust and evens out absorbency so the colour comes out uniform. Without a primer, the first coat of paint may be thinned with water by up to 15 %.
Concrete after 28 days at the earliest, cement and cement-lime plasters and fillers after 14 days, cement decorative plasters after 7 days.
Two coats by brush, roller or spray at +5 … +30 °C and humidity up to 80 %, the second after 6 hours at the earliest. To avoid shade differences, work wet on wet and paint one surface with paint from one batch.
The film of Teping Decor AS dissipates static charge, but carries it away only when earthed: a copper tape or anchors connected to the building’s earthing bar run along the perimeter of the painted surface.
CATALOGUE
01Resin flooringEpoxy. Polyurethane. PU cement.
02Enamels & paintsProtection for concrete and metal.
03Primers & varnishesFrom the first layer to the finish.
04Sports surfacesIndoor and outdoor applications.
05Polyurethane materialsInsulate. Bond. Waterproof. Mould.
07Dry floor mixesHeavy-duty floors and levellers.
Your expert
Head of Sales · Water-based paints
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Tell us what you are building, protecting or producing.
The right coating depends on budget and operating conditions — we will suggest the best fit.
