Teping® manufacturer
03 / 07 · Category
From the first layer to the finish.
The first and last layers of a coating system: primers for concrete and metal, anticorrosive primer-finish coatings and varnishes for resin floors. The primer decides how well the whole system bonds and lasts.
The basics
The primer is the first layer of a system: it penetrates and strengthens the substrate, binds dust and gives the next layers their grip.
For concrete, Teping® makes epoxy and polyurethane primers, including a penetrating primer, a fast-drying one and a conductive one for antistatic floors.
For metal there are anticorrosive primers, including a zinc-rich one, and primer-finish coatings combine primer and finish in one product.
Polyurethane clear coats complete the system: they protect a self-levelling floor and give it a matt or semi-matt look.
PRODUCT LINES
Pick a line to jump straight to its products.
Epoxy and polyurethane primers that prepare concrete for floors and coatings.
Products: 6See products 02Primers for steel: the base of an anticorrosive system.
Products: 4See products 03Primer and finish in one product for faster metal protection.
Products: 1See products 04Varnishes that seal and protect resin floors.
Products: 2See productsPRODUCTS
Every product in this category, grouped by line. The product page has the full description; send an enquiry and we will help you choose a system.
Chemistry
Substrate
Corrosivity, ISO 12944
Properties
Epoxy and polyurethane primers that prepare concrete for floors and coatings.
Products: 6Six primers in one table: task, solids, consumption and timing.
| Primer | Task | Solids | Per coat | Apply from | Walk on | Colour |
|---|---|---|---|---|---|---|
| Teping R 1155 Primer 100 | Primer and binder for quartz screeds, putties and repairs | 99% | from 0.15 kg/m² | +10 °C | after 24 h | clear |
| Teping R 1155 Primer Fast | Filled fast-curing primer, binder for putties | 99% | from 0.22 kg/m² | +5 °C | after 6 h at +25 °C | grey |
| Teping R 1155 Primer AS | Conductive layer over copper tape in an antistatic floor | 60% | 0.30 kg/m² | +15 °C | finish after 24 h | black |
| Teping R 1155 Primer | Primer and stand-alone dustproofing coat | 79% | 0.30 kg/m² | +10 °C | after 24 h | grey |
| Teping R 1155 Primer 40 | Deep-penetrating impregnation, dustproofing | 40% | from 0.20 kg/m² | +15 °C | after 12 h | clear |
| Teping PU Primer 1K | One-component primer under polyurethane coatings | 46% | 0.20 kg/m² | +10 °C | after 12 h | clear |
Times at +20 °C unless stated. R 1155 Primer 100 solids are by volume, from its instruction.
Primer · Epoxy · 2K
Solvent-free epoxy primer for epoxy and polyurethane floors. Also a binder for quartz-filled screeds, fillers and repair mortars.
Used in systems1.11.21.31.41.52.12.22.32.43.13.23.33.43.63.7
Primer · Epoxy · 2K
Coloured epoxy primer for weak, absorbent and dense substrates. Seals pores, shows up irregularities and forms a dense bonding film for subsequent coats.
Primer · Epoxy · 2K
Two-component, pre-filled epoxy primer with accelerated curing for epoxy and polyurethane floor systems. Also a binder for fillers and repair mortars.
Penetrating primer · Epoxy · 2K
Clear, deep-penetrating, solvent-borne epoxy sealer. Primer for epoxy and polyurethane floors or a standalone low-cost dust-proofing and hardening coating.
Primer · Epoxy · 2K
Conductive waterborne epoxy primer that forms the sealing layer over copper tape in antistatic self-levelling floor systems.
Used in systems1.5
Primer · Polyurethane · 1K
Single-component, moisture-curing polyurethane primer based on an isocyanate prepolymer. Can be applied below 5 °C, indoors and outdoors.
Primers for steel: the base of an anticorrosive system.
Products: 4
Primer · Polyurethane · 1K
Single-component penetrating polyurethane primer with anticorrosive pigments. Primer coat of anticorrosive systems for steel structures in all macroclimatic regions (GOST 15150).
Primer · Epoxy · 2K
Two-component epoxy primer with over 80% zinc in the dry film for long-term corrosion protection of steel in C3–C5 environments (ISO 12944-5:2018).
Primer · Epoxy · 2K
Two-component, high-solids epoxy primer based on zinc phosphate. Primer coat of anticorrosive systems for steel structures in all macroclimatic regions (GOST 15150).
Primer · Polyurethane · 1K
Single-component polyurethane primer with effective anticorrosive pigments. Primer coat of anticorrosive systems for steel structures in all macroclimatic regions (GOST 15150).
Primer and finish in one product for faster metal protection.
Products: 1
Primer-finish · Epoxy · 2K
Two-component thixotropic, surface-tolerant epoxy mastic with zinc phosphate. Used as a single-coat system or as a primer for high-build protection of metal and concrete structures.
Varnishes that seal and protect resin floors.
Products: 2
Clear coat · Acrylic PU · 2K
Two-component semi-matt acrylic polyurethane varnish. Wax additives improve the wear resistance of the coating and help prevent scratches and scuffs.
Clear coat · Acrylic PU · 2K
Matt varnish that refreshes the look of resin floors and protects marble, granite and other stone. Can also be used on its own as a coating for concrete.
There is no product with this combination. Clear one of the filters or describe the task to us and we will suggest a solution. Find a system
Systems
Products from this category inside proven systems, from primer to topcoat.
1.1Smooth epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.2Anti-slip epoxy floor, 2–2.5 mm
2–2.5 mmLayers: 4−20 to +60 °COpen the system
1.3Epoxy floor with flakes and varnish, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system
1.4Acid-resistant epoxy self-levelling floor, 2 mm
2 mmLayers: 3−20 to +60 °COpen the system
1.5Antistatic epoxy self-levelling floor, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system
2.1Smooth polyurethane self-levelling floor, 2 mm
2 mmLayers: 3−30 to +50 °COpen the system
2.2Anti-slip polyurethane floor, 2 mm
2 mmLayers: 4−30 to +50 °COpen the system
2.3Polyurethane floor with flakes and varnish, 2 mm
2 mmLayers: 5−20 to +60 °COpen the system
2.4Polyurethane floor with flakes and varnish, 3 mm
3 mmLayers: 7−30 to +50 °COpen the system
3.1Three-coat epoxy floor paint
up to 0.3 mmLayers: 3−20 to +60 °COpen the system
3.2Anti-slip epoxy floor paint
thin coatLayers: 4−20 to +60 °COpen the system
3.3Epoxy paint with flakes and varnish
thin coatLayers: 4−20 to +60 °COpen the system
3.4Three-coat polyurethane floor paint
up to 0.25 mmLayers: 3−30 to +60 °COpen the system
3.5Three-coat one-component polyurethane coating
thin coatLayers: 3−30 to +60 °COpen the system
3.6Two-coat epoxy sealer
thin coatLayers: 2−30 to +60 °COpen the system
3.7Textured coloured quartz coating, 4–10 mm
4–10 mmLayers: 4−30 to +60 °COpen the system
3.8Polyurethane sealer
thin coatLayers: 2−30 to +70 °COpen the system
5.4Teping Sport PU combined surface
thin coatLayers: 6−20 to +60 °COpen the system Steel protection
How to combine Teping® primers, intermediate coats and topcoats for categories C2–C5, which preparation to choose and how to check thickness.
Guides
Practical guides on choosing, preparing for and installing these products.
02
Preparing a concrete substrate for a resin coatingWhat the substrate must be, how to check it, and how to grind, repair and prime it so that the coating holds for years.
4 min readRead the guide 
04
Temperature, humidity and the dew pointWhy two-component coatings are sensitive to cold and heat, how to check the dew point and what changes in winter and summer.
4 min readRead the guide 05
Caring for a resin floorDaily and weekly cleaning, what never to use, how often to renew the varnish and how to repair scratches.
3 min readRead the guide 06
Protecting steel structures from corrosionCorrosivity categories, surface preparation, a three-coat Teping® system and the conditions for application.
3 min readRead the guide APPLICATIONS
Typical projects for this category. Tell us about yours and we will suggest a system.
FAQ
An epoxy primer does: it forms a layer that water does not pass through. A polyurethane primer protects only partly.
Only temporarily: a primer is not resistant enough to abrasion.
No. Wait until the primer has fully dried, otherwise the adhesion will be poor.
Sand improves adhesion and strength of the coating, and on slopes it stops the next coat from running.
An epoxy primer has high adhesion and chemical resistance and penetrates deep into concrete, which makes it the usual choice for a garage floor. A polyurethane primer is more elastic and resists UV light, so it suits outdoor work, where epoxy is not recommended. An epoxy primer can be overcoated with a polyurethane paint.
CATALOGUE
01Resin flooringEpoxy. Polyurethane. PU cement.02Enamels & paintsProtection for concrete and metal.
04Sports surfacesIndoor and outdoor applications.
05Polyurethane materialsInsulate. Bond. Waterproof. Mould.
06Water-based paintsWalls, ceilings and facades.
07Dry floor mixesHeavy-duty floors and levellers.
Your expert
Sales Manager · Primers & varnishes
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Tell us what you are building, protecting or producing.
The right coating depends on budget and operating conditions — we will suggest the best fit.