Teping® manufacturer
Warehouses
Epoxy floor with flakes and matt varnish on 600 m² of warehouse.
How it was done
An industrial floor for a lubricants warehouse.
Teping Floor 205 Industrial self-levelling epoxy with decorative flakes and matt varnish.
The floor is chemically resistant, takes constant forklift traffic and is easy to clean.
Site photos
System on site
Layers and consumption per m² as they were applied on this site.
Enter your area and the enquiry will include the system and approximate quantities. A technologist will check the substrate and prepare a calculation.
Estimate based on the consumption on this site. Exact quantities depend on the substrate and are calculated by a TNP technologist.
Technical solutions album
A close system is described in TNP's album: layers, consumption, service conditions and substrate requirements.
1.3Epoxy floor with flakes and varnish, 2 mmA decorative self-levelling floor with colour flakes under a polyurethane varnish that hides dirt and scratches.
2 mmLayers: 5−20 to +60 °COpen the system
Epoxy floorsEsports centre
Saint Petersburg, Russia500 m²Teping Floor 205 PU Varnish Matt
View project 
Epoxy floorsGarage with flakes
Moscow, Russia30 m²Teping Floor 205 PU Varnish Matt
View project 
Epoxy floorsChemical plant warehouses
Shchyolkovo, Russia4,000 m²Teping Floor 205 PU Varnish Matt
View project 
Epoxy floorsPoultry farm
Makinsk, Kazakhstan2,700 m²Teping Floor 205 Industrial
View project 
Epoxy floorsOpen-pit coal mine warehouses
Borodino, Krasnoyarsk Territory, Russia1,750 m²Teping Floor 205 Industrial
View project 
Epoxy floorsCoal mine spare parts warehouse
Nazarovo, Krasnoyarsk Territory, Russia1,380 m²Teping Floor 205 Industrial
View project 
Epoxy floorsWarehouse with acid-resistant floor
Saint Petersburg, Russia1,200 m²Teping Floor 205 CR
View project 
Epoxy floorsWarehouse with antistatic floor
Saint Petersburg, Russia200 m²Teping Floor 205 AS
View project Sites, texts and photos come from tnpgroup.ru; every site was finished with Teping® coatings. Consumption is as applied on site.
Tell us about the area, substrate and loads. We will select a system from those already working on similar sites.
