Teping® manufacturer
Car parks and garages · Homes
Grey gloss 3 mm epoxy floor on a 60 m² garage.
How it was done
A grey gloss self-levelling floor for a garage.
Teping Floor 205 C epoxy with quartz sand over primer and scratch coat.
The floor resists petrol and oils and takes wheels, studded tyres included.
Site photos
System on site
Layers and consumption per m² as they were applied on this site.
Enter your area and the enquiry will include the system and approximate quantities. A technologist will check the substrate and prepare a calculation.
Estimate based on the consumption on this site. Exact quantities depend on the substrate and are calculated by a TNP technologist.
Technical solutions album
A close system is described in TNP's album: layers, consumption, service conditions and substrate requirements.
1.1Smooth epoxy self-levelling floor, 2 mmA seamless epoxy coating that protects concrete from abrasion, stops dusting and gives the substrate a water-repellent, decorative finish.
2 mmLayers: 3−20 to +60 °COpen the system
Epoxy floorsGarage in Shushary
Saint Petersburg, Russia160 m²Teping Floor 205 Industrial
View project 
Epoxy floorsWhite floor in an apartment
Saint Petersburg, Russia50 m²Teping Floor 205 C
View project 
Epoxy floorsChemical plant warehouses
Shchyolkovo, Russia4,000 m²Teping Floor 205 PU Varnish Matt
View project 
Epoxy floorsPoultry farm
Makinsk, Kazakhstan2,700 m²Teping Floor 205 Industrial
View project 
Epoxy floorsArchitectural association offices
Saint Petersburg, Russia2,650 m²Teping Floor 205 Industrial
View project 
Epoxy floorsOpen-pit coal mine warehouses
Borodino, Krasnoyarsk Territory, Russia1,750 m²Teping Floor 205 Industrial
View project 
Epoxy floorsCoal mine spare parts warehouse
Nazarovo, Krasnoyarsk Territory, Russia1,380 m²Teping Floor 205 Industrial
View project 
Epoxy floorsContemporary art centre
Moscow, Russia300 m²Teping Floor 205 C
View project Sites, texts and photos come from tnpgroup.ru; every site was finished with Teping® coatings. Consumption is as applied on site.
Tell us about the area, substrate and loads. We will select a system from those already working on similar sites.
