Teping® manufacturer
05 / 07 · Category
Insulate. Bond. Waterproof. Mould.
Polyurethane components we have produced since 2021: adhesives, PIR panel systems, waterproofing and insulation foams. We supply systems for manufacturers and contractors.
Applications
Pick a task and we show the Teping® components for it.
Buildings and roofsSeamless spray insulation of floors, vaults and roofs.
Sandwich panelsSystems and adhesives for continuous panel lines.
Sports grounds and playgroundsBinder for rubber crumb and EPDM, adhesives for tiles and artificial grass.
Cavity fillingPour-in insulation of wall cavities, closed or open cell.
PipelinesPipe-in-pipe, pre-insulated pipes and pipe sections.
WaterproofingSeamless mastic over mineral and timber substrates.
Timber and panelsAdhesives for glulam, SIP panels and parquet.
Furniture and car partsFlexible foam, integral skin foam and moulded decor.The basics
Polyurethane systems are one- and two-component materials that become polyurethane foam, adhesives and waterproofing at the factory or on site.
Rigid foam is sprayed or poured to insulate buildings, pipes and panels, while flexible and integral-skin systems go into furniture, décor and moulded parts.
Polyurethane adhesives bond sandwich and SIP panels, glulam, parquet, rubber crumb and artificial grass.
PRODUCT LINES
Pick a line to jump straight to its products.
High adhesion to wood, metal and concrete.
Products: 7See products 02Systems for PIR panel production, plus adhesive primer.
Products: 2See products 03Polyurethane waterproofing for mineral and timber substrates.
Products: 1See products 04Closed-cell and open-cell spray foam.
Products: 2See products 05Closed-cell and open-cell pour-in-place foam.
Products: 3See products 06Pipe insulation and decorative mouldings.
Products: 3See products 07Soft foam and coatings for it.
Products: 2See products 08Foam with a dense skin for moulded parts.
Products: 1See productsPRODUCTS
Every product in this category, grouped by line. The product page has the full description; send an enquiry and we will help you choose a system.
Components
Processing
Properties
High adhesion to wood, metal and concrete.
Products: 7| Adhesive | Use | Type | Viscosity at 25 °C | Pot life | Cure |
|---|---|---|---|---|---|
| Teping AD RC | Binder for rubber crumb and EPDM | 1K, moisture-curing | 3,000 – 5,000 mPa·s | 10 – 60 min | 18 – 24 h |
| Teping AD SIP | SIP and sandwich panels: insulation to OSB and facings | 1K, moisture-curing | 1,000 – 6,000 mPa·s | 5 – 50 min | 24 h |
| Teping AD GT | Glued laminated timber | 1K, moisture-curing | 9,800 mPa·s | 30 min | 2 h |
| Teping AD SP | Mineral wool sandwich panels on a continuous line | 2K | 150 – 500 mPa·s | no data | no data |
| Teping AD RT | Rubber tiles indoors and outdoors | 2K | no data | 25 – 40 min | in service after 7 days |
| Teping AD P | Parquet and timber floors | 2K | no data | 25 – 35 min | strength within 48 h |
| Teping AD AG | PVC coverings and artificial grass | 2K | no data | 25 – 40 min | in service after 7 days |
Adhesive · Polyurethane · 1K
Non-shrink, moisture-curing polyurethane adhesive for bonding insulation to OSB and other facing materials in structural insulated panels.
Adhesive · Polyurethane · 2K
Two-component polyurethane adhesive for laying parquet, floorboards, engineered boards and other wood floor coverings indoors.
Adhesive · Polyurethane · 1K
Moisture-curing polyurethane binder for rubber crumb and EPDM surfaces, both air-dried and hot-pressed. Cures to a strong, resilient coating.
Adhesive · Polyurethane · 1K
Non-shrink, moisture-curing polyurethane adhesive for glued laminated timber and other engineered wood products, including those needing high moisture resistance.
Adhesive · Polyurethane · 2K
Two-component polyurethane adhesive for continuous production of sandwich panels with mineral wool (stone or glass wool) cores and galvanised steel facings.
Adhesive · Polyurethane · 2K
Two-component polyurethane adhesive for thick-layer application, used to lay moulded and crumb-rubber tiles indoors and outdoors.
Used in systems5.4
Adhesive · Polyurethane · 2K
Two-component polyurethane adhesive for PVC coverings, including artificial grass. Bonds roll coverings indoors and outdoors.
Systems for PIR panel production, plus adhesive primer.
Products: 2Panels · PIR · 2K
A system for continuous manufacturing of energy-efficient sandwich panels with a thermally insulating polyisocyanurate foam core.
Adhesive primer · PIR · 2K
Non-shrink, moisture-curing polyurethane adhesive that bonds polyisocyanurate insulation to the panel facing in continuous PIR panel production.
Polyurethane waterproofing for mineral and timber substrates.
Products: 1Waterproofing · Polyurethane · 2K
Two-component, rigid-elastic polyurethane mastic for seamless waterproofing on mineral and wooden substrates, indoors and outdoors.
Closed-cell and open-cell spray foam.
Products: 2| System | A : B by volume | Cream time | Rise time | Layer per pass | Thermal conductivity | Cell | Air temperature |
|---|---|---|---|---|---|---|---|
| Teping Spray 20-60 W | 100 : 100 | 2 – 10 s | 8 – 20 s | up to 25 mm | max. 0.035 W/(m·K) | closed | −5…+40 °C |
| Teping Spray 10 | 100 : 105 | 2 – 6 s | 7 – 15 s | up to 25 mm | max. 0.045 W/(m·K) | open | +15…+40 °C |
Spray · PU foam · 2K
Two-component, water-blown spray system producing a seamless layer of rigid closed-cell polyurethane foam for thermal insulation.
Spray · PU foam · 2K
Two-component spray system producing a seamless thermal insulation layer of open-cell polyurethane foam. More open cells give better vapour permeability.
Closed-cell and open-cell pour-in-place foam.
Products: 3| System | A : B by volume | Cream time | Rise time | Free-rise density | Thermal conductivity | Cell |
|---|---|---|---|---|---|---|
| Teping FL 20-60 F/W | 100 : 100 | 10 – 20 s | 110 – 130 s | no data | max. 0.035 W/(m·K) | closed |
| Teping FL 10 | 100 : 100 | 10 – 20 s | 110 – 130 s | no data | no data | open |
| Teping FL RE | no data | 15 – 25 s | no data | 25 – 35 kg/m³ | no data | no data |
Pour-in-place · PU foam · 2K
Two-component system for closed-cell polyurethane foam insulation, poured after mixing the components on high- and low-pressure machines.
Pour-in-place · PU foam · 2K
Two-component system for low-density, open-cell polyurethane insulation installed by pouring. More open cells give better vapour permeability.
Pour-in-place · PU foam · 2K
Two-component system for producing rigid polyurethane foam that insulates water heaters and refrigeration equipment by direct foaming.
Pipe insulation and decorative mouldings.
Products: 3Moulding · PU foam · 2K
Two-component system for heat-resistant polyurethane foam used to insulate pre-insulated, pipe-in-pipe and pipe-in-mould pipelines and in PPM insulation.
Moulding · PU foam · 2K
Two-component polyurethane system for pipe insulation shells, poured into press moulds automatically on high- and low-pressure machines.
Moulding · PU foam · 2K
Two-component polyurethane system for decorative, finishing and structural products such as cornices, ceiling roses, balusters, furniture parts and sculptures.
Soft foam and coatings for it.
Products: 2
Flexible foam · PU foam · 2K
Two-component polyurethane system for producing low-density, open-cell flexible foam. Processed automatically or by hand.
Foam coating · Polyurethane · 1K
One-component polyurethane coating that forms an elastic film on flexible foams and prevents filler loss in the production of radio-absorbing materials.
Foam with a dense skin for moulded parts.
Products: 1Integral skin · PU foam · 2K
Two-component system for moulding integral-skin polyurethane foam parts for the automotive and furniture industries.
There is no product with this combination. Clear one of the filters or describe the task to us and we will suggest a solution. Find a system
Systems
Products from this category inside proven systems, from primer to topcoat.
5.1Teping Sport Classic safety surface
from 10 mmLayers: 3−30 to +60 °COpen the system
5.2Teping Sport EPDM safety surface
from 10 mmLayers: 3−30 to +60 °COpen the system
5.3Teping Sport Combi safety surface
12–20 mmLayers: 5−30 to +60 °COpen the system
5.4Teping Sport PU combined surface
thin coatLayers: 6−20 to +60 °COpen the system Guides
Practical guides on choosing, preparing for and installing these products.
07
Rubber crumb and EPDM surfaces for playgrounds and sports groundsTeping Sport Classic, EPDM and Combi compared, the bases they need, consumption per square metre and how they are laid.
4 min readRead the guide 10
Spray polyurethane foam: open or closed cellHow Teping Spray 20-60 W and Spray 10 differ, what substrates and temperatures they need, and how to spray in layers.
3 min readRead the guide APPLICATIONS
Typical projects for this category. Tell us about yours and we will suggest a system.
FAQ
Closed-cell rigid foam has the lower thermal conductivity: up to 0.035 W/(m·K) for Teping Spray 20-60 W. Open-cell foam lets more water vapour through: Teping Spray 10, up to 0.045 W/(m·K).
No more than 25 mm per pass, after a first thin coat of 3–5 mm; usually 3–4 passes. Each pass goes on only when the previous one has risen and cooled to 40 °C.
Yes, at ambient temperatures from −5 °C, with components heated to 45–50 °C. The surface must be dry and free of condensation, and spraying stops in rain.
CATALOGUE
01Resin flooringEpoxy. Polyurethane. PU cement.
02Enamels & paintsProtection for concrete and metal.
03Primers & varnishesFrom the first layer to the finish.
04Sports surfacesIndoor and outdoor applications.
06Water-based paintsWalls, ceilings and facades.
07Dry floor mixesHeavy-duty floors and levellers.
Your expert
Sales Manager · Polyurethane materials
Helps you choose a coating, sends the TDS and works out quantities. Write in whichever of these languages suits you.
Tell us what you are building, protecting or producing.
The right coating depends on budget and operating conditions — we will suggest the best fit.