A short reference to the standards cited in corrosion protection designs for steel structures in Russia and abroad.
the basis for selecting systems; GOST 34667 in Russia
ISO 12944
protection of building structures against corrosion
SP 28
preparing metal for painting
GOST 9.402
2 min read
01ISO 12944 and GOST 34667
ISO 12944 “Corrosion protection of steel structures by protective paint systems” is adopted in Russia as GOST 34667-2021 (identical translation). The parts most often needed in a design:
Part
Subject
ISO 12944-1
general introduction and durability ranges L, M, H, VH
ISO 12944-2
corrosivity categories C1–CX and Im1–Im4
ISO 12944-3
design considerations: access, drainage, edges
ISO 12944-4
types of surface and their preparation
ISO 12944-5
protective paint systems: number of coats and nominal thickness
ISO 12944-6
laboratory performance tests of systems for C2–C5
ISO 12944-7, -8
execution and supervision of work, developing specifications
ISO 12944-9
systems for offshore and categories CX and Im4
02Russian codes and GOST standards
Document
Subject
SP 28.13330.2017
protection of building structures against corrosion: degrees of aggressiveness, requirements for coatings and structures
SP 72.13330.2016
execution and acceptance of anticorrosion work
GOST 9.402-2004
preparing metal surfaces for painting: degreasing and cleaning
GOST 9.401-2018
accelerated tests of coatings for resistance to climatic factors
GOST 9.032-74
classes and designation of paint coatings by appearance
GOST 15150-69
climatic versions of products: U1, UHL1, HL1
03Surface preparation
Standard
Subject
ISO 8501-1
rust grades A–D and cleaning grades Sa and St
ISO 8501-3
preparation of welds, edges and imperfections: P1–P3
ISO 8501-4
water jetting grades Wa and flash rust
ISO 8502-3
assessment of dust on prepared surfaces
ISO 8502-6, -9
sampling and measuring soluble salts
ISO 8503-1, -2
surface profile after blast cleaning
04Coating inspection
Standard
Subject
ISO 2808
methods of measuring film thickness
ISO 19840
measurement and acceptance of dry film thickness on rough steel
Sources. ISO 12944, ISO 8501, ISO 8502, ISO 8503, ISO 19840, GOST 9.402, SP 28.13330 and the technical data sheets of Teping® products on tnpgroup.ru. Check project values against the current TDS.
Products
Related products
Properties, consumption and documents are on the product pages.
SP 28.13330 is the Russian code for building structures: it sets the degree of aggressiveness of the environment and the protection requirements. ISO 12944 (GOST 34667) classifies the environment into categories C1–CX and links them with system durability. Designs often use both: the degree of aggressiveness under SP 28 and the system under ISO 12944.
Which product documents are available?
Technical data sheets and application instructions are open on the product pages. The safety data sheet (SDS) is provided on request, as are certificates and registration documents.
