Teping® manufacturer
Food and chemical · Production
Beige 3 mm antistatic epoxy floor on 3,500 m² of a confectionery plant.
How it was done
A beige antistatic floor for production areas.
Primed and scratch-coated substrate, a copper tape grid under antistatic primer, Teping Floor 205 AS top coat.
The floor resists abrasion, is easy to clean and lasts.
Site photos
System on site
Layers and consumption per m² as they were applied on this site.
Enter your area and the enquiry will include the system and approximate quantities. A technologist will check the substrate and prepare a calculation.
Estimate based on the consumption on this site. Exact quantities depend on the substrate and are calculated by a TNP technologist.
Technical solutions album
A close system is described in TNP's album: layers, consumption, service conditions and substrate requirements.
1.5Antistatic epoxy self-levelling floor, 2 mmA conductive epoxy coating with an earthing circuit that dissipates static electricity.
2 mmLayers: 5−20 to +60 °COpen the system
Epoxy floorsAbrasives plant
Saint Petersburg, Russia1,538 m²Teping Floor 205 AS
View project 
Epoxy floorsInstrument plant
Oryol, Russia1,000 m²Teping Floor 205 AS
View project 
Epoxy floorsSwitchgear room
Moscow, Russia200 m²Teping Floor 205 AS
View project 
Epoxy floorsWarehouse with antistatic floor
Saint Petersburg, Russia200 m²Teping Floor 205 AS
View project 
Epoxy floorsPoultry farm
Makinsk, Kazakhstan2,700 m²Teping Floor 205 Industrial
View project 
Epoxy floorsPlant room with acid-resistant floor
Saint Petersburg, Russia700 m²Teping Floor 205 CR
View project 
Epoxy floorsTobacco factory washrooms
Moscow, Russia40 m²Teping Floor 205 C
View project 
Floor paintsHeavy machinery service centre
Yaroslavl, Russia3,000 m²Teping R 1155
View project Sites, texts and photos come from tnpgroup.ru; every site was finished with Teping® coatings. Consumption is as applied on site.
Tell us about the area, substrate and loads. We will select a system from those already working on similar sites.
